#22191 closed enhancement (fixed)
update ECL to 20.4.24
Reported by:  dimpase  Owned by:  

Priority:  critical  Milestone:  sage9.2 
Component:  packages: standard  Keywords:  upgrade, ecl 
Cc:  rws, fbissey, jdemeyer, charpent, jpflori, arojas, ghtimokau, saraedum, infinity0, slelievre, thansen, embray, mjo  Merged in:  
Authors:  Marius Gerbershagen, Nils Bruin, Dima Pasechnik, Erik Bray  Reviewers:  Dima Pasechnik, Nils Bruin, François Bissey, Emmanuel Charpentier, Matthias Koeppe 
Report Upstream:  Fixed upstream, but not in a stable release.  Work issues:  
Branch:  f82c716 (Commits, GitHub, GitLab)  Commit:  
Dependencies:  Stopgaps: 
Description (last modified by )
ECL20.4.24 has been released (on 2020/04/24)
https://commonlisp.net/project/ecl/posts/ECL20424release.html
We should update, as it will resolve some Maxima bugs, and is essential for resolving other Maxima bugs.
Tarball: see checksums.ini [upstream_url].
(To configure Sage to download from the upstream URL, use ./configure enabledownloadfromupstreamurl
)
Attachments (4)
Change History (272)
comment:1 Changed 5 years ago by
 Branch set to u/dimpase/ecl16.1.3
 Commit set to 33e59cb6e6d5b6b16f0b23eacc566d613ffccd07
 Description modified (diff)
comment:2 Changed 5 years ago by
oops, somewhat wrong branch... testing anyway
comment:3 Changed 5 years ago by
 Commit changed from 33e59cb6e6d5b6b16f0b23eacc566d613ffccd07 to eff60815383ca3b3120a7a26e98e1712072c70ac
Branch pushed to git repo; I updated commit sha1. This was a forced push. New commits:
eff6081  update ECL to 16.1.3  most of our patches are obsolete

comment:4 Changed 5 years ago by
 Status changed from new to needs_review
comment:5 Changed 5 years ago by
 Cc fbissey added
comment:6 Changed 5 years ago by
The FPE problem on #18920 in comment 99 might be due to ECL 16.1.3 throwing an FPE exception at
> (/ 1.0 0.0) Condition of type: DIVISIONBYZERO #<a DIVISIONBYZERO>
while 16.1.2 happily returns
#.ext::singlefloatpositiveinfinity
comment:7 Changed 5 years ago by
with 6.1.3 there is apparently new notrapfpe
which emulates the old behaviour. So we somehow have to figure out where to put this option.
comment:8 Changed 5 years ago by
If it is an option for ecl
then somewhere in sage/libs/ecl.pyx
is the place, probably in ecl_init
but I have to dig a bit.
comment:9 followup: ↓ 10 Changed 5 years ago by
There is already an option ECL_OPT_TRAP_SIGFPE
is it equivalent?
comment:10 in reply to: ↑ 9 Changed 5 years ago by
Replying to fbissey:
There is already an option
ECL_OPT_TRAP_SIGFPE
is it equivalent?
I guess it should be. Perhaps it's something more subtle... I attach the crash dump.
comment:11 Changed 5 years ago by
 Commit changed from eff60815383ca3b3120a7a26e98e1712072c70ac to ac8348c462b11a67ee22f77e265afc0ce0572620
Branch pushed to git repo; I updated commit sha1. Last 10 new commits:
62b5825  some more easy doctest fixes

3c28022  more easy doctest fixes

5d86413  Merge branch 'public/t18920' of trac.sagemath.org:sage into max5381

100d9d6  workaround for #<a ARITHMETICERROR> (18920#comment:60

79eb82f  fix for maxima bug #3236

814e8ed  reflect patch's dependence on an earlier maxima tree commit

af7e5ff  new scaling of dynatomic polynomial

68da1e4  Merge branch 'public/t18920' of trac.sagemath.org:sage into ecl1613

6bae4b1  bumped up for 5.39.0. Sage builds (with ecl 16.1.3)

ac8348c  disable SIGFPE traps

comment:12 Changed 5 years ago by
 Commit changed from ac8348c462b11a67ee22f77e265afc0ce0572620 to a06f00245bfb652270eeea78248348777d006538
Branch pushed to git repo; I updated commit sha1. This was a forced push. New commits:
3ed32fb  Upgrade Jupyter packages, add enum34

72993f2  Merge branch 'u/jdemeyer/upgrade_jupyter_packages' of trac.sagemath.org:sage into develop

2a291ab  Merge branch 'develop' of trac.sagemath.org:sage into develop

6027df9  Merge branch 'develop' of trac.sagemath.org:sage into develop

b9ee72d  update ECL to 16.1.3  most of our patches are obsolete

a06f002  disable SIGFPE traps

comment:13 Changed 5 years ago by
 Commit changed from a06f00245bfb652270eeea78248348777d006538 to ad25254d3445265211081b50501af670daf4dade
comment:14 Changed 5 years ago by
 Status changed from needs_review to needs_work
 Work issues set to sort out SIGFPE
this is a clean update branch for ECL 16.1.3  needs work to sort out SIGFPE.
comment:15 followup: ↓ 17 Changed 5 years ago by
I'm pretty sure the change in behaviour comes from this checkin on ECL: https://gitlab.com/embeddablecommonlisp/ecl/commit/c2b2941768f39544f45f24e19a30081d316eeb71
Clearly, this code will be setting FPE generation flags in more places than before. Probably ECL doesn't go out of its way to reset FPE flags when ECL is exiting. So probably, after executing ECL code, it is now the case that (often?) the FPE flags are set the way ECL wants; not the way we want. So in addition to restoring the SIG handlers, we should probably sprinkle an appropriate amount of fesetenv calls around the ECL entry and exit wrappers.
comment:16 Changed 5 years ago by
Upstream tells me that https://gitlab.com/embeddablecommonlisp/ecl/blob/develop/src/lsp/top.lsp#L1456 makes writeerror
patch unnecessary.
So we should remove it too.
comment:17 in reply to: ↑ 15 Changed 5 years ago by
 Cc jdemeyer added
Replying to nbruin:
I'm pretty sure the change in behaviour comes from this checkin on ECL: https://gitlab.com/embeddablecommonlisp/ecl/commit/c2b2941768f39544f45f24e19a30081d316eeb71
Clearly, this code will be setting FPE generation flags in more places than before.
but this ECL macro is not about the case at hand, as I believe we do have fenv.h available. Or you mean that Sage does not use fenv.h?
Probably ECL doesn't go out of its way to reset FPE flags when ECL is exiting. So probably, after executing ECL code, it is now the case that (often?) the FPE flags are set the way ECL wants; not the way we want. So in addition to restoring the SIG handlers, we should probably sprinkle an appropriate amount of fesetenv calls around the ECL entry and exit wrappers.
this does not explain why simply setting ECL_OPT_TRAP_SIGFPE to 0 solves the issue for division by 0, but not for FP overflow.
However, I don't understand why doing anything with ECL_OPT_TRAP_SIGFPE has any effect whatsoever (assuming we do not preserve it among other ECL's interrupts such as SIGINT). Shouldn't
#and put the Sage signal handlers back for i in range(1,32): sigaction(i, &sage_action[i], NULL)
in ecl.pyx be overriding whatever ECL did with SIGFPE?
comment:18 Changed 5 years ago by
The experimental branch using ECLs SIGFPE handler is on girt trac: u/dimpase/ecl16.1.3exp So you can have a look  it also doesn't work.
comment:19 followup: ↓ 20 Changed 5 years ago by
I am not very familiar with this kind of coding issues and/or with SIG handling in general.
If we're doing our sig handler setting properly then it shouldn't matter what sig handlers ECL installs when we run nonECL code, because we switch them out. As far as I can see this is the case. I see no evidence that an ECL sig handler is interfering with our work. The traceback doesn't mention ECL code at all. Just an uncaught signal.
It seems that the sage action for SIGFPE is to coredump. That's what we're seeing.
There are flags that govern when SIGFPE is raised (rather than propagating a NaN or something similar). The ECL macro I pointed at will be inserted in ECL generated code quite a bit, so I expect that macro to be executed ALL THE TIME. Plus, the patch was made exactly to fix an issue of unraised SIGFPEs (CL apparently prefers the exceptions over NaNs? by default).
We are not taking measures to set fenv to our liking after executing ECL, and one change in the new ECL version is certainly to change fenv more often. So I think it's worth a try to save & restore's sage's own fenv across ECL calls.
It could be that ECL changes its FPE raise mask depending on the value of ECL_OPT_TRAP_SIGFPE. I haven't checked. That would be consistent with observed behaviour.
comment:20 in reply to: ↑ 19 ; followups: ↓ 22 ↓ 29 Changed 5 years ago by
Replying to nbruin:
I am not very familiar with this kind of coding issues and/or with SIG handling in general.
If we're doing our sig handler setting properly then it shouldn't matter what sig handlers ECL installs when we run nonECL code, because we switch them out. As far as I can see this is the case. I see no evidence that an ECL sig handler is interfering with our work. The traceback doesn't mention ECL code at all. Just an uncaught signal.
But why do we get an uncaught FP overflow signal? That's because booting ECL up destroys Sages' sig handler, even if we switch ECLs SIGFPE handler off. How exactly this is possible is not clear to me.
It seems that the sage action for SIGFPE is to coredump. That's what we're seeing.
no, it is not. Sage's action on FP overflow is to return infinity. Why does ECL continue to mess around with it, even if told not to? In fact, ECL 16.1.3 has a new command line switch, notrapfp
, and it works.
(i.e. you get ECLs infinity if you try to convert a too big number to float if this switch is on, and you get an interrupt if that switch is off)
There are flags that govern when SIGFPE is raised (rather than propagating a NaN or something similar). The ECL macro I pointed at will be inserted in ECL generated code quite a bit, so I expect that macro to be executed ALL THE TIME. Plus, the patch was made exactly to fix an issue of unraised SIGFPEs (CL apparently prefers the exceptions over NaNs? by default).
We are not taking measures to set fenv to our liking after executing ECL, and one change in the new ECL version is certainly to change fenv more often. So I think it's worth a try to save & restore's sage's own fenv across ECL calls.
It could be that ECL changes its FPE raise mask depending on the value of ECL_OPT_TRAP_SIGFPE. I haven't checked. That would be consistent with observed behaviour.
comment:21 Changed 5 years ago by
 Branch changed from u/dimpase/ecl16.1.3 to u/nbruin/ecl16.1.3
comment:22 in reply to: ↑ 20 Changed 5 years ago by
 Commit changed from ad25254d3445265211081b50501af670daf4dade to a2cadc04eb91409ad1f88b5f4d6ad80d5dfc3451
Replying to dimpase:
In fact, ECL 16.1.3 has a new command line switch,
notrapfp
, and it works.
The corresponding ECL command is (si::trapfpe t nil)
, so we could just pass that to ECL just after cl_boot. That might be easier/more efficient than passing it in the argv.
This should put ECL in agreement about what the fenv FPE raise flags are supposed to be (and then it also doesn't matter what SIGFPE handler ECL uses, because the signals will not occur, so we don't need to restore ECL's SIGFPE handler for ECL code either.
comment:23 followup: ↓ 24 Changed 5 years ago by
 Commit changed from a2cadc04eb91409ad1f88b5f4d6ad80d5dfc3451 to ea11dd53248462bf2859fb3cbe34bfd47f006682
Branch pushed to git repo; I updated commit sha1. New commits:
ea11dd5  Restore "fenv" upon entry and exit of ECL code

comment:24 in reply to: ↑ 23 Changed 5 years ago by
comment:25 Changed 5 years ago by
 Commit changed from ea11dd53248462bf2859fb3cbe34bfd47f006682 to 35e9d3d1610bade7ae7d5fac735244be25e009eb
comment:26 Changed 5 years ago by
OK, that should do the trick! I guess ECL_OPT_TRAP_SIGFPE doesn't have much to do with what we need because it's supposed to control what happens with SIGFPE if ECL is catching signals, whereas we're interested in preventing FP exceptions from generating signals at all. the routine si:trapfpe
is exactly the one to set that behaviour, in a way that is maintained in ECL's environment tracking as well.
comment:27 followup: ↓ 31 Changed 5 years ago by
 Cc charpent added
Just as a memento for future testing :
With the current ECL Maxima 5.39.0 gives :
(%i3) taylor(integrate(f(x),x),x,x_0,2); taylor: unable to expand at a point specified in: 'integrate(f(x),x)  an error. To debug this try: debugmode(true);
whereas :
%i2) taylor(integrate(f(x),x),x,x_0,2); (%o2) 'at('integrate(f(x),x),x = x_0)+f(x_0)*(xx_0) +(('at('diff(f(x),x,1),x = x_0)) *(xx_0)^2) /2
is expected since Maxima 5.38.1 at the latest...
comment:28 Changed 5 years ago by
DISCLAIMER: I just found out that all my testing was on 16.1.2. While I expect that my fix should work, I haven't actually successfully tested this. Other people who do have easy access to 16.1.3 can verify this easily.
comment:29 in reply to: ↑ 20 Changed 5 years ago by
OK, this appears to work. make ptest
with this ECL 16.1.3 branch and Maxima from #18920 passes without any errors.
comment:30 Changed 5 years ago by
 Report Upstream changed from N/A to Reported upstream. No feedback yet.
Daniel Kochmański (ECL lead dev) invited me to open an issue #347 on this.
comment:31 in reply to: ↑ 27 Changed 5 years ago by
Replying to charpent:
Just as a memento for future testing :
With the current ECL Maxima 5.39.0 gives :
(%i3) taylor(integrate(f(x),x),x,x_0,2); taylor: unable to expand at a point specified in: 'integrate(f(x),x)  an error. To debug this try: debugmode(true);
this unfortunately stays the same with ECL 16.1.3. This is for Maxima/ECL people to fix, not for us.
comment:32 followups: ↓ 34 ↓ 35 Changed 5 years ago by
It would be really good to explain on this ticket what the SIGFPE
issue is all about.
comment:33 Changed 5 years ago by
 Description modified (diff)
comment:34 in reply to: ↑ 32 Changed 5 years ago by
Replying to jdemeyer:
It would be really good to explain on this ticket what the
SIGFPE
issue is all about.
examples can be found on #18920. More specifically, in Sage Maxima built with ECL 16.1.3 and unpatched libs/ecl.pyx
gives crash dumps like
sage: g(x)=taylor(log(x),x,1,6) # this initialises ECL/Maxima sage: q = (2^53) * 2^971/1 sage: float(q) # boom, instead of "inf" as the answer. ... Unhandled SIGFPE: An unhandled floating point exception occurred. ...
and
sage: g(x)=taylor(log(x),x,1,6); g x > 1/6*(x  1)^6 + 1/5*(x  1)^5  1/4*(x  1)^4 + 1/3*(x  1)^3  1/2*(x  1)^2 + x  1 sage: plot(log(x),(x,0,2)) ... Unhandled SIGFPE: An unhandled floating point exception occurred. ...
comment:35 in reply to: ↑ 32 ; followup: ↓ 36 Changed 5 years ago by
The mechanics of why SIGFPE is a problem with ECL 6.1.3 by default:
 Apparently it is desirable in CL to raise floating point exceptions rather than propagate Inf and NaN by default (CL is a formally specified language, so it probably states that FP exceptions should be handled that way)
 This is most easily done by using fenv.h functionality to configure floating point arithmetic to raise SIGFPE when these things arise. So, ECL does that, and has a SIGFPE handler in place.
 We switch the ECL sighandlers in/out whenever we're entering/exiting significant ECL code. Sage is not expecting floating point exceptions to raise SIGFPE, so sage does not have a SIGFPE handler.
 In order to fix a bug elsewhere in ECL, https://gitlab.com/embeddablecommonlisp/ecl/commit/c2b2941768f39544f45f24e19a30081d316eeb71 changed ECL to much more often update the fenv to reflect its desired state (previously, they were not doing this at all). ECL is not actually written to be called as a library, so it doesn't take any precautions to set/restore global state such as fenv upon entry/exit. Hence, after running ECL in its default configuration, you're liable to end up with an fenv in which SIGFPE can be raised. This is what was happening.
For solutions:
 it's possible to tell ECL to NOT let floating point exceptions raise SIGFPE. Then ECL's SIGFPE handler is irrelevant, and the fenv state ECL wants is basically consistent with what we want. This is the solution currently used.
 alternatively, we could let ECL do what it wants and set/restore fenv upon entry/exit of ECL code.
fesetenv
andfegetenv
are the relevant routines fromfenv.h
. In addition, though, we should restore ECL's SIGFPE handler during ECL code execution, if we go that route (currently we don't).
This was one of these issues that's really easy to resolve, once you understand the problem.
The main confusion is that there are two components: whether floating point exceptions should raise SIGFPE, and how SIGFPE gets handled once it's raised. You might think these two components are controlled via the same mechanism, but they are not. It looks like ECL might be investigating if its configuration can be streamlined on these two issues: https://gitlab.com/embeddablecommonlisp/ecl/issues/347
Currently there are two options that seem relevant: ECL_OPT_TRAP_SIGFPE and notrapfpe
that feed into different places and control different aspects.
comment:36 in reply to: ↑ 35 ; followup: ↓ 37 Changed 5 years ago by
Replying to nbruin:
This was one of these issues that's really easy to resolve, once you understand the problem.
So the issue is solved now?
comment:37 in reply to: ↑ 36 ; followup: ↓ 38 Changed 5 years ago by
Replying to jdemeyer:
Replying to nbruin:
This was one of these issues that's really easy to resolve, once you understand the problem.
So the issue is solved now?
it is desirable to tell ECL to NOT let floating point exceptions raise SIGFPE before booting it up, not during the bootup, for this leaves a time window where SIGFPE can be raised. How can this be done?
comment:38 in reply to: ↑ 37 Changed 5 years ago by
Replying to dimpase:
it is desirable to tell ECL to NOT let floating point exceptions raise SIGFPE before booting it up, not during the bootup, for this leaves a time window where SIGFPE can be raised. How can this be done?
I think this is an academic issue, because in our current setting, no fp exceptions will occur in the window, and hence the way SIGFPE is handled is irrelevant. Anyway:
I assume ECL installs its SIGFPE handler before it executes any FP instructions and/or sets the fenv. The ECL's SIGFPE handler greatly eases the effect of SIGFPE. So if (si::trapfpe T NIL)
is executed right after cl_boot
; before switching the SIGhandlers, I think the risk is smaller (I don't think there is a risk at all because no FP work occurs in this process, so it's hard to make an accurate estimate of the relative risks here).
Alternatively, you could trust that ECL knows what it's doing and execute cl_boot with an argv that contains notrapfpe
. With any luck, that should just get processed in the same way as command line options upon startup. It is then ECL's responsibility to do this before a SIGFPE actually occurs. In reality, this is essentially the same as just feeding ECL (si::trapfpe T NIL)
just after boot.
fenv is supposed to be threadspecific, so concurrency issues should not come into play, even if sage were ever to grow multiple threads.
comment:39 Changed 4 years ago by
 Status changed from needs_work to needs_review
 Work issues sort out SIGFPE deleted
Needs review?
comment:40 followup: ↓ 44 Changed 4 years ago by
there is now https://gitlab.com/embeddablecommonlisp/ecl/issues/349
and also still write_error
patch to remove.
comment:41 followup: ↓ 42 Changed 4 years ago by
 Status changed from needs_review to needs_work
You should document the change to src/sage/libs/ecl.pyx
. At a minimum, there should be a link to this ticket.
comment:42 in reply to: ↑ 41 Changed 4 years ago by
Replying to jdemeyer:
You should document the change to
src/sage/libs/ecl.pyx
. At a minimum, there should be a link to this ticket.
Sure. I didn't set it up for review, Nils did. IMHO upstream is still working on this.
comment:43 Changed 4 years ago by
 Cc jpflori added
comment:44 in reply to: ↑ 40 Changed 4 years ago by
Replying to dimpase:
there is now https://gitlab.com/embeddablecommonlisp/ecl/issues/349 and also still
write_error
patch to remove.
That ticket has now been closed and its fix was to change a test.
No movement on https://gitlab.com/embeddablecommonlisp/ecl/issues/347, so if updating ECL is relevant then doing so with the (si::trapfpe T NIL)
given here is probably a good way to go.
comment:45 Changed 3 years ago by
 Description modified (diff)
 Summary changed from update ECL to 6.1.3 to update ECL to 16.1.3
comment:46 Changed 3 years ago by
Any chance this could be finished soon? Some of the ECL maintainers in Debian would like to update the ECL package.
comment:47 followup: ↓ 48 Changed 3 years ago by
If I am being honest we want a brand new release of ECL. It won't fix everything but we may be in a better position.
comment:48 in reply to: ↑ 47 Changed 3 years ago by
Replying to fbissey:
If I am being honest we want a brand new release of ECL. It won't fix everything but we may be in a better position.
I second this. 16.1.3 introduced tricky changes, and the upcoming release (they wanted to get something in late 2017, but OK...) is going again to be much different in the way exceptions are handled.
comment:49 Changed 3 years ago by
 Cc ghantoniorojas added
comment:50 Changed 3 years ago by
 Cc arojas added; ghantoniorojas removed
comment:51 Changed 3 years ago by
 Cc ghtimokau added
comment:52 Changed 3 years ago by
 Cc saraedum added
comment:53 Changed 3 years ago by
In case we're really waiting for the next ecl release, here is the gitlab milestone and the rc testing issue (which was opened a year ago and got practically no attention).
comment:54 followup: ↓ 57 Changed 3 years ago by
 Keywords upgrade ecl added
 Milestone changed from sage7.6 to sage8.6
Does it help with this ticket that upstream issue 347 was closed a month ago:
comment:55 Changed 3 years ago by
 Report Upstream changed from Reported upstream. No feedback yet. to Fixed upstream, but not in a stable release.
Note: debiansciencesagemath discussion about upgrading to ECL 16.1.3:
comment:56 Changed 3 years ago by
 Cc infinity0 slelievre thansen added
comment:57 in reply to: ↑ 54 ; followup: ↓ 58 Changed 3 years ago by
Replying to slelievre:
Does it help with this ticket that upstream issue 347 was closed a month ago:
It is unclear why it was closed. Possibly because no one was caring. As far as it goes, some of the fix we need would be hard to rebase on top of 16.1.3  we may just as well try a snapshot from git with all the uncertainty that it entails.
comment:58 in reply to: ↑ 57 ; followup: ↓ 61 Changed 3 years ago by
Replying to fbissey:
It is unclear why it was closed. Possibly because no one was caring. As far as it goes, some of the fix we need would be hard to rebase on top of 16.1.3  we may just as well try a snapshot from git with all the uncertainty that it entails.
If I'm reading it correctly it was closed by https://gitlab.com/embeddablecommonlisp/ecl/commit/2a9084b105caf26c89bb16ed4dd0bf5aa7ceab59
Beckporting that commit to 16.1.3 still doesn't fix the SIGFPE crashes on Arch unfortunately.
comment:59 followup: ↓ 60 Changed 3 years ago by
Oh right. I am obviously not used to gitlab UI for those. Did you also manage to backport the fix for https://gitlab.com/embeddablecommonlisp/ecl/issues/317 ?
comment:60 in reply to: ↑ 59 Changed 3 years ago by
Replying to fbissey:
Oh right. I am obviously not used to gitlab UI for those. Did you also manage to backport the fix for https://gitlab.com/embeddablecommonlisp/ecl/issues/317 ?
I did now, still no improvement.
comment:61 in reply to: ↑ 58 ; followup: ↓ 62 Changed 3 years ago by
Replying to arojas:
If I'm reading it correctly it was closed by https://gitlab.com/embeddablecommonlisp/ecl/commit/2a9084b105caf26c89bb16ed4dd0bf5aa7ceab59
Beckporting that commit to 16.1.3 still doesn't fix the SIGFPE crashes on Arch unfortunately.
As the ECL developer that made this change: Did you also set the ECL_OPT_TRAP_SIGFPE option to false, i.e. put an extra line ecl_set_option(ECL_OPT_TRAP_SIGFPE, 0);
into the ecl.pyx file before testing this? Because otherwise if you use the default value of true, you still instruct ECL to generate and catch floating point exceptions.
comment:62 in reply to: ↑ 61 ; followups: ↓ 63 ↓ 75 Changed 3 years ago by
Replying to ghspaghettisalat:
Replying to arojas:
If I'm reading it correctly it was closed by https://gitlab.com/embeddablecommonlisp/ecl/commit/2a9084b105caf26c89bb16ed4dd0bf5aa7ceab59
Beckporting that commit to 16.1.3 still doesn't fix the SIGFPE crashes on Arch unfortunately.
As the ECL developer that made this change: Did you also set the ECL_OPT_TRAP_SIGFPE option to false, i.e. put an extra line
ecl_set_option(ECL_OPT_TRAP_SIGFPE, 0);
into the ecl.pyx file before testing this? Because otherwise if you use the default value of true, you still instruct ECL to generate and catch floating point exceptions.
Yes, still no difference
comment:63 in reply to: ↑ 62 ; followup: ↓ 64 Changed 3 years ago by
Replying to arojas:
Replying to ghspaghettisalat:
Replying to arojas:
If I'm reading it correctly it was closed by https://gitlab.com/embeddablecommonlisp/ecl/commit/2a9084b105caf26c89bb16ed4dd0bf5aa7ceab59
Beckporting that commit to 16.1.3 still doesn't fix the SIGFPE crashes on Arch unfortunately.
As the ECL developer that made this change: Did you also set the ECL_OPT_TRAP_SIGFPE option to false, i.e. put an extra line
ecl_set_option(ECL_OPT_TRAP_SIGFPE, 0);
into the ecl.pyx file before testing this? Because otherwise if you use the default value of true, you still instruct ECL to generate and catch floating point exceptions.Yes, still no difference
Is the patch set you are working with available somewhere? I would like to try what you have done myself. May be more eyeballs can detect an issue that escaped you.
comment:64 in reply to: ↑ 63 ; followup: ↓ 65 Changed 3 years ago by
Replying to fbissey:
Is the patch set you are working with available somewhere? I would like to try what you have done myself. May be more eyeballs can detect an issue that escaped you.
Here it is: http://pkgbuild.com/~arojas/sagematheclsigfpe.patch
ecl version is 16.1.3 with 2a9084b1 and c2b29417 backported
comment:65 in reply to: ↑ 64 Changed 3 years ago by
Replying to arojas:
Replying to fbissey:
Is the patch set you are working with available somewhere? I would like to try what you have done myself. May be more eyeballs can detect an issue that escaped you.
Here it is: http://pkgbuild.com/~arojas/sagematheclsigfpe.patch
ecl version is 16.1.3 with 2a9084b1 and c2b29417 backported
I was thinking of the backport patches as well actually.
comment:66 Changed 3 years ago by
comment:67 Changed 3 years ago by
Thank you. I must say my memory of that conversation  started more than a year ago  was making the backport patches way more complicated.
comment:68 Changed 3 years ago by
 Cc embray added
comment:69 followup: ↓ 70 Changed 3 years ago by
Is this something we should also try to get done for 8.6, along with the GAP 4.10 upgrade? ISTM that would be best from the Debian perspective.
comment:70 in reply to: ↑ 69 Changed 3 years ago by
Replying to embray:
Is this something we should also try to get done for 8.6, along with the GAP 4.10 upgrade? ISTM that would be best from the Debian perspective.
ecl 16.1.3 has been out for a while. Us in the distro world have been stumped for a bit. If you can move it, it would be very much appreciated. Everyone has their own timetable and that would be more interesting to me in Gentoo than gap 4.10 (because I am literally in charge of gap amongst other things  and don't get me wrong getting gap 4.10 is important especially getting rid of libgap).
comment:71 Changed 3 years ago by
ECL has not done a new release in years. We were hoping their next release would address some of problems with signals and exceptions we found in 16.1.3  something that needed tricky work on Sage side, only to be thrown away, as ECL is going to change in this area a lot...
comment:72 Changed 3 years ago by
Note: the ECL release manager tells me the current estimate for the ECL 16.2.0 release date is "first quarter of 2019".
comment:73 Changed 3 years ago by
So they should have a beta soon, no?
comment:74 Changed 3 years ago by
Well they have been "release candidate testing" without any activity for a year now (https://gitlab.com/embeddablecommonlisp/ecl/issues/333). I wouldn't bet on the Q1 2019 release.
comment:75 in reply to: ↑ 62 ; followups: ↓ 76 ↓ 77 Changed 3 years ago by
Replying to arojas:
Replying to ghspaghettisalat:
Replying to arojas:
If I'm reading it correctly it was closed by https://gitlab.com/embeddablecommonlisp/ecl/commit/2a9084b105caf26c89bb16ed4dd0bf5aa7ceab59
Beckporting that commit to 16.1.3 still doesn't fix the SIGFPE crashes on Arch unfortunately.
As the ECL developer that made this change: Did you also set the ECL_OPT_TRAP_SIGFPE option to false, i.e. put an extra line
ecl_set_option(ECL_OPT_TRAP_SIGFPE, 0);
into the ecl.pyx file before testing this? Because otherwise if you use the default value of true, you still instruct ECL to generate and catch floating point exceptions.Yes, still no difference
Then I'm guessing, the branch at https://git.sagemath.org/sage.git/log/?h=u/nbruin/ecl16.1.3 also failed for you? Because all the patch of https://gitlab.com/embeddablecommonlisp/ecl/commit/2a9084b105caf26c89bb16ed4dd0bf5aa7ceab59 does is to call (si::trapfpe t nil)
during startup if the ECL_OPT_TRAP_SIGFPE
option is false.
Anyway, I think the real issue is that maxima enables floating point overflow exceptions during startup (see the last line in the src/eclport.lisp file of the maxima source directory). Removing this line should fix the observed crashes also with an unpatched ECL 16.1.3 and without the need to explicitely call (si::trapfpe t nil)
in ecl.pyx (as long as the ECL_OPT_TRAP_SIGFPE
option is false of course). This is also consistent with the observation in https://gitlab.com/embeddablecommonlisp/ecl/issues/317 that floating point overflows behaved differently than the other floating point exceptions.
comment:76 in reply to: ↑ 75 Changed 3 years ago by
Replying to ghspaghettisalat:
Then I'm guessing, the branch at https://git.sagemath.org/sage.git/log/?h=u/nbruin/ecl16.1.3 also failed for you?
You're right, the branch never worked for me
Anyway, I think the real issue is that maxima enables floating point overflow exceptions during startup (see the last line in the src/eclport.lisp file of the maxima source directory). Removing this line should fix the observed crashes also with an unpatched ECL 16.1.3 and without the need to explicitely call
(si::trapfpe t nil)
in ecl.pyx (as long as theECL_OPT_TRAP_SIGFPE
option is false of course).
And you're right again. Removed that line in maxima and there are no more crashes.
comment:77 in reply to: ↑ 75 ; followup: ↓ 79 Changed 3 years ago by
Replying to ghspaghettisalat:
Anyway, I think the real issue is that maxima enables floating point overflow exceptions during startup (see the last line in the src/eclport.lisp file of the maxima source directory). Removing this line should fix the observed crashes also with an unpatched ECL 16.1.3 and without the need to explicitely call
(si::trapfpe t nil)
in ecl.pyx (as long as theECL_OPT_TRAP_SIGFPE
option is false of course).
In that case, I suspect that for us the right place to fix it is to revert the effect of the line in eclport.lisp
after initialization in maxima_lib
. Then we don't have to patch maxima. Also, maxima may have a good reason to do this under normal operation, and sagemath does build maxima both for standalone use and for library use (and it uses the same fas
for both!). Unless we have a good reason, we should probably not modify the standalone behaviour.
The relevant file would be sage/interfaces/maxima_lib.py
, somewhere after the (require 'maxima)
. It already has a lot of lisp commands that go digging in the internals of maxima. The short window where maxima
turns on fpe exceptions and we turn them off again shouldn't be a problem.
comment:78 followup: ↓ 84 Changed 3 years ago by
With this [1] patch in sagemath it no longer crashes for me, with unmodified ecl and maxima
comment:79 in reply to: ↑ 77 Changed 3 years ago by
Replying to nbruin:
Replying to ghspaghettisalat:
Anyway, I think the real issue is that maxima enables floating point overflow exceptions during startup (see the last line in the src/eclport.lisp file of the maxima source directory). Removing this line should fix the observed crashes also with an unpatched ECL 16.1.3 and without the need to explicitely call
(si::trapfpe t nil)
in ecl.pyx (as long as theECL_OPT_TRAP_SIGFPE
option is false of course).In that case, I suspect that for us the right place to fix it is to revert the effect of the line in
eclport.lisp
after initialization inmaxima_lib
. Then we don't have to patch maxima. Also, maxima may have a good reason to do this under normal operation, and sagemath does build maxima both for standalone use and for library use (and it uses the samefas
for both!). Unless we have a good reason, we should probably not modify the standalone behaviour.The relevant file would be
sage/interfaces/maxima_lib.py
, somewhere after the(require 'maxima)
. It already has a lot of lisp commands that go digging in the internals of maxima. The short window wheremaxima
turns on fpe exceptions and we turn them off again shouldn't be a problem.
+1 Sage should not depend on nonstandard functionality supplied via patch in order to work.
comment:80 Changed 3 years ago by
Of the patches we still include for our ECL build, are there any that haven't been submitted upstream, or at least that still need upstream issues?
I know that I got flistenbug.patch
fixed here: https://gitlab.com/embeddablecommonlisp/ecl/merge_requests/51 so that patch can probably be backported to 16.1.3 if need be (and in any case, the bug it fixes was only, to my knowledge, affecting Cygwin, so I don't care about it for Linux).
comment:81 Changed 3 years ago by
Also, are we still doing the tarball patching with spkgsrc
? I did not do that, so I'm guessing it's obsolete.
comment:82 followup: ↓ 83 Changed 3 years ago by
The difficulty/problem here is that ECL's si_trap_fpe
still uncondtionally (when available) calls feenableexcept. The effect of (si::trapfpe t nil)
is effectively to call feenableexcept(FE_DIVBYZERO  FE_OVERFLOW  FE_UNDERFLOW  FE_INVALID)
which means now SIGFPE
s will be sent to the program that weren't otherwise.
The only effect of setting ECL_OPT_TRAP_SIGFPE = 0
is that ECL's signal handler won't be installed (actually this setting could be avoided entirely by saving/restoring ECL's SIGFPE handler like we do some of its other signal handlers).
However, (si::trapfpe t nil)
still results now in unhandled SIGFPE
s in random places where previously floating point exceptions were just ignored, or handled manually.
comment:83 in reply to: ↑ 82 ; followup: ↓ 85 Changed 3 years ago by
Replying to embray:
The difficulty/problem here is that ECL's
si_trap_fpe
still uncondtionally (when available) calls feenableexcept. The effect of(si::trapfpe t nil)
is effectively to callfeenableexcept(FE_DIVBYZERO  FE_OVERFLOW  FE_UNDERFLOW  FE_INVALID)
which means nowSIGFPE
s will be sent to the program that weren't otherwise.
No, the effect of (si::trapfpe t nil)
is to call feenableexcept(0)
. What you're describing happens with (si::trapfpe t t)
.
The only effect of setting
ECL_OPT_TRAP_SIGFPE = 0
is that ECL's signal handler won't be installed (actually this setting could be avoided entirely by saving/restoring ECL's SIGFPE handler like we do some of its other signal handlers).
The effect of ECL_OPT_TRAP_SIGFPE = 0
in ECL 16.1.3 is a) that no signal handler for SIGFPE exceptions is installed and b) that in contrast to ECL_OPT_TRAP_SIGFPE = 1
no floating point exceptions are enabled (i.e. feenableexcept is not called). Because of the feature request https://gitlab.com/embeddablecommonlisp/ecl/issues/347, the next ECL release changes this behaviour to call feenableexcept(0)
during startup if ECL_OPT_TRAP_SIGFPE
is 0.
However,
(si::trapfpe t nil)
still results now in unhandledSIGFPE
s in random places where previously floating point exceptions were just ignored, or handled manually.
No, it doesn't, as explained above.
comment:84 in reply to: ↑ 78 Changed 3 years ago by
Replying to arojas:
With this [1] patch in sagemath it no longer crashes for me, with unmodified ecl and maxima
This patch also works for me. It's not ideal but it's okay as a temporary workaround.
comment:85 in reply to: ↑ 83 Changed 3 years ago by
Replying to ghspaghettisalat:
Replying to embray:
The difficulty/problem here is that ECL's
si_trap_fpe
still uncondtionally (when available) calls feenableexcept. The effect of(si::trapfpe t nil)
is effectively to callfeenableexcept(FE_DIVBYZERO  FE_OVERFLOW  FE_UNDERFLOW  FE_INVALID)
which means nowSIGFPE
s will be sent to the program that weren't otherwise.No, the effect of
(si::trapfpe t nil)
is to callfeenableexcept(0)
. What you're describing happens with(si::trapfpe t t)
.
You're right: I was having trouble understanding exactly how this code works. The problem doesn't come from (si::trapfpe t nil)
, but rather the fact that maxima later enables traps for overflows (which then needs to be subsequently disabled, per the patch in comment:78).
I guess, what I would want, would be an option to effectively turn trapfpe
into a noop, because it's still modifying the global floating point environment in a way that's rather opaque and detrimental when embedding.
Anyways, since we identified for now the one place where this was happeningloading maximaI'm content for now to step away, though we should probably change our ecl_sig_on/off()
to save/restore the floating point environment and clear any floating point exceptions.
Happy New Year and have a good night!
comment:86 Changed 3 years ago by
Here's my attempt to patch this more generally. It appears to work, but I'm not sure how robust it is. With this, it's not necessary to manually call si::trapfpe
anywhere, because ECL's FPE traps are saved/restored alongside its signal handlers by ecl_sig_on/off()
:

src/sage/libs/ecl.pyx
diff git a/src/sage/libs/ecl.pyx b/src/sage/libs/ecl.pyx index 8dd2895..fa24ac0 100644
a b from __future__ import print_function, absolute_import 16 16 #adapted to work with pure Python types. 17 17 18 18 from libc.stdlib cimport abort 19 from libc.signal cimport SIGINT, SIGBUS, SIGSEGV, SIGCHLD 19 from libc.signal cimport SIGINT, SIGBUS, SIGSEGV, SIGCHLD, SIGFPE 20 20 from libc.signal cimport raise_ as signal_raise 21 21 from posix.signal cimport sigaction, sigaction_t 22 22 cimport cysignals.signals … … cdef extern from "eclsig.h": 48 48 void ecl_sig_off() 49 49 cdef sigaction_t ecl_sigint_handler 50 50 cdef sigaction_t ecl_sigbus_handler 51 cdef sigaction_t ecl_sigfpe_handler 51 52 cdef sigaction_t ecl_sigsegv_handler 52 53 cdef mpz_t ecl_mpz_from_bignum(cl_object obj) 53 54 cdef cl_object ecl_bignum_from_mpz(mpz_t num) 55 cdef int fegetexcept() 56 cdef int feenableexcept(int) 57 cdef int fedisableexcept(int) 58 cdef int ecl_feflags 54 59 55 60 cdef cl_object string_to_object(char * s): 56 61 return ecl_read_from_cstring(s) … … def init_ecl(): 239 244 global ecl_has_booted 240 245 cdef char *argv[1] 241 246 cdef sigaction_t sage_action[32] 247 cdef int sage_fpes 242 248 cdef int i 243 249 244 250 if ecl_has_booted: … … def init_ecl(): 258 264 for i in range(1,32): 259 265 sigaction(i, NULL, &sage_action[i]) 260 266 267 sage_fpes = fegetexcept() 268 261 269 #initialize ECL 262 270 ecl_set_option(ECL_OPT_SIGNAL_HANDLING_THREAD, 0) 263 271 cl_boot(1, argv) … … def init_ecl(): 265 273 #save signal handler from ECL 266 274 sigaction(SIGINT, NULL, &ecl_sigint_handler) 267 275 sigaction(SIGBUS, NULL, &ecl_sigbus_handler) 276 sigaction(SIGFPE, NULL, &ecl_sigfpe_handler) 268 277 sigaction(SIGSEGV, NULL, &ecl_sigsegv_handler) 269 278 279 #save ECL's floating point exception flags 280 ecl_feflags = fegetexcept() 281 270 282 #verify that no SIGCHLD handler was installed 271 283 cdef sigaction_t sig_test 272 284 sigaction(SIGCHLD, NULL, &sig_test) … … def init_ecl(): 277 289 for i in range(1,32): 278 290 sigaction(i, &sage_action[i], NULL) 279 291 292 fedisableexcept(ecl_feflags) 293 feenableexcept(sage_fpes) 294 280 295 #initialise list of objects and bind to global variable 281 296 # *SAGELISTOFOBJECTS* to make it rooted in the reachable tree for the GC 282 297 list_of_objects=cl_cons(Cnil,cl_cons(Cnil,Cnil)) … … def init_ecl(): 320 335 (values nil (princtostring cnd))))) 321 336 """)) 322 337 safe_funcall_clobj=cl_eval(string_to_object(b"(symbolfunction 'sagesafefuncall)")) 323 324 cl_eval(string_to_object("(si::trapfpe T NIL)"))325 338 ecl_has_booted = 1 326 339 327 340 cdef cl_object ecl_safe_eval(cl_object form) except NULL: 
src/sage/libs/eclsig.h
diff git a/src/sage/libs/eclsig.h b/src/sage/libs/eclsig.h index f9f2690..c1d5244 100644
a b 9 9 10 10 11 11 #include <signal.h> 12 13 /* Rummage around to determine how ECL was configured */ 14 #define ECL_AVOID_FPE_H /* Prevent some local includes */ 15 #include <ecl/configinternal.h> 16 17 #ifdef HAVE_FENV_H 18 #include <fenv.h> 19 #ifndef FE_ALL_EXCEPT 20 #define FE_ALL_EXCEPT FE_DIVBYZERO  FE_OVERFLOW  FE_UNDERFLOW  FE_INVALID 21 #endif 22 #else 23 #ifndef FE_ALL_EXCEPT 24 #define FE_ALL_EXCEPT 0 25 #endif 26 #endif 27 28 #ifndef HAVE_FEENABLEEXCEPT 29 /* These are GNU extensions */ 30 #define fegetexcept() 0 31 #define feenablexcept(flags) 32 #define fdisableexcept(flags) 33 #endif 34 12 35 static struct sigaction ecl_sigint_handler; 13 36 static struct sigaction ecl_sigbus_handler; 37 static struct sigaction ecl_sigfpe_handler; 14 38 static struct sigaction ecl_sigsegv_handler; 15 39 static struct sigaction sage_sigint_handler; 16 40 static struct sigaction sage_sigbus_handler; 41 static struct sigaction sage_sigfpe_handler; 17 42 static struct sigaction sage_sigsegv_handler; 43 static int ecl_feflags; 44 static int sage_feflags; 18 45 19 46 static inline void set_ecl_signal_handler(void) 20 47 { 21 48 sigaction(SIGINT, &ecl_sigint_handler, &sage_sigint_handler); 22 49 sigaction(SIGBUS, &ecl_sigbus_handler, &sage_sigbus_handler); 50 sigaction(SIGFPE, &ecl_sigfpe_handler, &sage_sigfpe_handler); 23 51 sigaction(SIGSEGV, &ecl_sigsegv_handler, &sage_sigsegv_handler); 52 /* sage_feflags should be 0; we don't set them otherwise */ 53 sage_feflags = fedisableexcept(FE_ALL_EXCEPT); 54 feenableexcept(ecl_feflags); 24 55 } 25 56 26 57 static inline void unset_ecl_signal_handler(void) 27 58 { 28 59 sigaction(SIGINT, &sage_sigint_handler, NULL); 29 60 sigaction(SIGBUS, &sage_sigbus_handler, NULL); 61 sigaction(SIGFPE, &sage_sigfpe_handler, NULL); 30 62 sigaction(SIGSEGV, &sage_sigsegv_handler, NULL); 63 ecl_feflags = fedisableexcept(FE_ALL_EXCEPT); 64 feenableexcept(sage_feflags); 31 65 } 32 66 33 67 /* This MUST be a macro because sig_on() must be in the same
comment:87 Changed 3 years ago by
 Branch changed from u/nbruin/ecl16.1.3 to public/ticket22191
 Commit 35e9d3d1610bade7ae7d5fac735244be25e009eb deleted
 Status changed from needs_work to needs_review
New branch based on the original one, rebased on 8.6.beta0, and including my floating point exception handling fixes. These nonstandard FPE APIs are woefully underdocumented and confusing, but I think this has the right idea and all tests pass for me, docs build, etc. It should be a nonissue on platforms that don't have feenableexcept()
, so we just treat it there as a noop.
comment:88 Changed 3 years ago by
 Commit set to f2eea3db4ce90cb5743033c32753b9d9ade75703
Branch pushed to git repo; I updated commit sha1. New commits:
615b29f  update ECL to 16.1.3  most of our patches are obsolete

1a643fa  set ECL to not trap floating point exceptions, so that SIGFPE will not occur

f2eea3d  improve save/restore of floating point exception handling when entering/leaving libecl

comment:89 Changed 3 years ago by
some patches don't apply
Setting up build directory for ecl16.1.3.p0 Finished extraction Applying patches from ../patches... Applying ../patches/flistenbug.patch patching file src/c/file.d Hunk #1 FAILED at 5317. 1 out of 1 hunk FAILED  saving rejects to file src/c/file.d.rej Error applying '../patches/flistenbug.patch' ************************************************************************ Error applying patches
comment:90 Changed 3 years ago by
 Status changed from needs_review to needs_work
comment:91 Changed 3 years ago by
I had renamed that patch while updating, but looks like I didn't push the updated patch.
comment:92 Changed 3 years ago by
 Commit changed from f2eea3db4ce90cb5743033c32753b9d9ade75703 to ee5a10b5781f825b4da678f54c8b5589d152e438
Branch pushed to git repo; I updated commit sha1. New commits:
ee5a10b  updated this patch to apply cleanly to ECL 16.1.3

comment:93 Changed 3 years ago by
 Status changed from needs_work to needs_review
comment:94 Changed 3 years ago by
 Reviewers set to Dima Pasechnik
Nils, could you have a look at this?
comment:95 Changed 3 years ago by
It seems to me that the fedisableexcept/feenableexcept
dance is supposed to switch between "ecl" FPE state and "sage" FPE state. However, that is not what those commands do. According to the documentation, fedisableexcept
just disables the given exceptions (and leaves the other ones the way they were) and feenableexcept
enables them. Furthermore, it seems these are supposedly glibc extensions.
When I look at the relevant manpage, it seems to indicate that fegetenv
and fesetenv
are defined in C99 and do set the FPE environment wholesale. So, would it be better to do:
fegetenv(&sage_fe_env) fesetenv(&ecl_fe_env) <do ecl stuff> fegetenv(&ecl_fe_env) fesetenv(&sagel_fe_env)
that might do a more comprehensive capture ...
comment:96 followup: ↓ 98 Changed 3 years ago by
I thought of using feget/setenv, but the reason I didn't is simply because ECL does not use them, and rather uses fedisableexcept
and feenableexcept
. See: https://gitlab.com/embeddablecommonlisp/ecl/blob/2a9084b105caf26c89bb16ed4dd0bf5aa7ceab59/src/c/unixint.d#L1234
It's not clear to me or well documented how feenable/disableexcept interact with fesetenv. Presumably the latter should encompass the former, but I have not looked into it in more detail. I agree that the get/setenv functions look better overall and more portable.
So for now I'd be more comfortable just doing exactly the converse to what ECL is doing. In this code I use fedisableexcept(FE_ALL_EXCEPT)
to just disable all floating point exceptions, followed by feenableexcept(...)
for just the ECL flags, or just the Sage flags (which should be 0, since I'm not aware of anything in Sage or any of its other dependencies that, at least by default, sets FPE traps, but we save/restore it anyways just in case).
comment:97 Changed 3 years ago by
I don’t recall whether numpy sets FPE traps, or merely monitors for FPEs, but this did cause us trouble in the past, see #22799.
comment:98 in reply to: ↑ 96 ; followup: ↓ 99 Changed 3 years ago by
Replying to embray:
I thought of using feget/setenv, but the reason I didn't is simply because ECL does not use them, and rather uses
fedisableexcept
andfeenableexcept
. See: https://gitlab.com/embeddablecommonlisp/ecl/blob/2a9084b105caf26c89bb16ed4dd0bf5aa7ceab59/src/c/unixint.d#L1234
OK, that makes sense. There is one point of concern: as far as I can see, these routines change which exceptions raise a signal. It doesn't change which flags are set. Can it be that sage or ecl get exception flag states they are not expecting because the state arose under a signal regime they are not used to? (getenv/setenv would take care of that because they'd swap the *entire* FP state)
Also: can we do something so that the patchbot can test this ticket? It looks like it can't find the ecl tarball at the moment.
comment:99 in reply to: ↑ 98 ; followup: ↓ 100 Changed 3 years ago by
Replying to nbruin:
Replying to embray:
I thought of using feget/setenv, but the reason I didn't is simply because ECL does not use them, and rather uses
fedisableexcept
andfeenableexcept
. See: https://gitlab.com/embeddablecommonlisp/ecl/blob/2a9084b105caf26c89bb16ed4dd0bf5aa7ceab59/src/c/unixint.d#L1234OK, that makes sense. There is one point of concern: as far as I can see, these routines change which exceptions raise a signal. It doesn't change which flags are set. Can it be that sage or ecl get exception flag states they are not expecting because the state arose under a signal regime they are not used to? (getenv/setenv would take care of that because they'd swap the *entire* FP state)
I'm afraid I don't exactly follow you here. Maybe you'd have to describe a specific case. However, the answer is probably "Yes, that's possible, but I don't currently have a case where that's occurring so I'm not going to worry about it until I do."
Also: can we do something so that the patchbot can test this ticket? It looks like it can't find the ecl tarball at the moment.
I don't know. The patchbot has some code for divining a link to the upstream tarball from the ticket description and downloading it, so I don't know why it's not working in this case.
comment:100 in reply to: ↑ 99 Changed 3 years ago by
Replying to embray:
I'm afraid I don't exactly follow you here. Maybe you'd have to describe a specific case.
I'd expect that signallingbased code would clear exception flags as it goes along, expecting a clear set of exception flags as normal state.
With NaNproducing code, the exception flags would usually pile up. Entering signallingbased code could therefore easily be confused if you feed it a state attained by NaNproducing code (it would be hard to tell what exception triggered the signal if all the flags are on ...)
It might be that ECL functions reasonably well with that kind of state poorly defined ... It seems it can turn on/off signals by itself already.
comment:101 Changed 3 years ago by
I'm sorry but I'm still not following. What do you mean by "entering signallingbased code"? Do you have some specific suggestions or are you just speculating at this point? I would like to move on here, that's all...
comment:102 Changed 3 years ago by
OK, I don't know enough about IEEE floats. Someone else with more expertise should take a look at this.
The fact that only part of the FP state gets swapped (which exceptions get trapped) and another part (exception state flags) does not, looks suspicious.
I would normally think that a little more rigorous argument than "it doesn't seem to cause problems right now" would be warranted before implementing such a shortcut in an interface. Someone with more expertise in scientific computing software using IEEE floats can probably make a better assessment on whether this is something to worry about.
comment:103 followup: ↓ 105 Changed 3 years ago by
It's not a question about IEEE floats at all per se, just the API.
And this is literally just doing the converse of what ECL does. I'm not worried about a "more rigorous argument" for a problem I don't have. Maybe that's just the pragmatist in me but I really don't have more time to spend on this unless someone can demonstrate an actual problem.
I do remember reading somewhere that fedisableexcept
also clears any exception flags, but I forget where, so I might need to doublecheck that. If it helps we could also add an explicit feclearexcept()
but that's as far as I'm willing to go right now. I don't think there's any point in otherwise delaying this further after...looks...2 years.
comment:104 Changed 3 years ago by
 Reviewers changed from Dima Pasechnik to Dima Pasechnik, Nils Bruin
 Status changed from needs_review to positive_review
with numerics moving to GPUs and TPUs, it's more and more a purely academic matter of sticking, or not, to IEEE floats standard. Let's go ahead with this, and hope that a new ECL release happens soon...
comment:105 in reply to: ↑ 103 Changed 3 years ago by
Replying to embray:
I do remember reading somewhere that
fedisableexcept
also clears any exception flags, but I forget where, so I might need to doublecheck that. If it helps we could also add an explicitfeclearexcept()
but that's as far as I'm willing to go right now.
I did go ahead and check on this since now I'm thinking I must have imagined or misremembered that. Modifying the exception masks does not cause any pending exceptions to be cleared, so theoretically this could result in some odd bugs I guess.
Nils has a point that it would be better to save/restore the entire FPU environment but my point still stands that for the present purpose it's mostly academic. I'm really only concerned about saving/reverting exactly what ECL is (potentially) doing and nothing more. Clearing any pending exceptions first does make sense though so I'll add that in real quick.
comment:106 Changed 3 years ago by
 Commit changed from ee5a10b5781f825b4da678f54c8b5589d152e438 to 85fcb48922383cd1c2ac36412ed761a507cb9537
 Status changed from positive_review to needs_review
Branch pushed to git repo; I updated commit sha1 and set ticket back to needs_review. New commits:
85fcb48  add feclearexcept to ecl_sig_on/off to clear any pending floating point status flags before modifying the traps

comment:107 Changed 3 years ago by
 Status changed from needs_review to positive_review
I tested the changes myself and it's not a very significant difference over what was already reviewed, so setting back to positive_review.
comment:108 Changed 3 years ago by
OK, I ran tests too, just to make sure, it all looks good.
comment:109 Changed 3 years ago by
 Milestone changed from sage8.6 to sage8.7
Well, clearly it was too late for this, though I believe this should have been part of 8.6. Changing milestone since it wasn't (and it was more a nicetohave I think than critical).
If downstream wants to use sagemath with this or a newer ECL they can simply use the patch from this branch.
comment:110 followups: ↓ 111 ↓ 112 Changed 3 years ago by
 Status changed from positive_review to needs_work
Doesn't work on OSX, maxima then fails to build with
for l in ecl; do for d in / /numerical /numerical/slatec; do .././installsh c d binary$l$d; done; done ecl norc \ eval '(progn (load "../lisputils/defsystem.lisp") (funcall (intern (symbolname :operateonsystem) :mk) "maxima" :compile :verbose t) (buildmaximalib))' \ eval '(ext:quit)' dyld: Library not loaded: @libdir@/libecl.16.1.dylib Referenced from: /Users/buildslavesage/slave/sage_git/build/local/bin/ecl Reason: image not found make[5]: *** [binaryecl/maxima] Abort trap: 6 make[5]: Target `all' not remade because of errors.
comment:111 in reply to: ↑ 110 Changed 3 years ago by
Replying to vbraun:
Doesn't work on OSX, maxima then fails to build with
Does building ECL actually work on OSX (what version?) ? It looks as if ECL is broken in some way then.
comment:112 in reply to: ↑ 110 Changed 2 years ago by
Replying to vbraun:
Doesn't work on OSX, maxima then fails to build with
for l in ecl; do for d in / /numerical /numerical/slatec; do .././installsh c d binary$l$d; done; done ecl norc \ eval '(progn (load "../lisputils/defsystem.lisp") (funcall (intern (symbolname :operateonsystem) :mk) "maxima" :compile :verbose t) (buildmaximalib))' \ eval '(ext:quit)' dyld: Library not loaded: @libdir@/libecl.16.1.dylib Referenced from: /Users/buildslavesage/slave/sage_git/build/local/bin/ecl Reason: image not found make[5]: *** [binaryecl/maxima] Abort trap: 6 make[5]: Target `all' not remade because of errors.
This is probably same as https://gitlab.com/embeddablecommonlisp/ecl/issues/398, fixed by https://gitlab.com/embeddablecommonlisp/ecl/commit/612eeb5ed1623c4c7cb71029aab39107caf1cdba
comment:113 Changed 2 years ago by
Looks like totally it.
comment:114 Changed 2 years ago by
 Commit changed from 85fcb48922383cd1c2ac36412ed761a507cb9537 to 61d68b4a3872e3ae05e3a42f6aa6d960b7847be9
comment:115 Changed 2 years ago by
 Status changed from needs_work to needs_review
Added upstream patch. It applies without problem and doesn't break things on linux. But it has to be tested on OS X.
comment:116 Changed 2 years ago by
I wonder if #27225 will fix the darwin build bot for this ticket once it is in.
comment:117 Changed 2 years ago by
 Commit changed from 61d68b4a3872e3ae05e3a42f6aa6d960b7847be9 to 4b4255e39af6d1baf19ba0af9d11e924501946eb
Branch pushed to git repo; I updated commit sha1. New commits:
4b4255e  Merge branch 'develop' into ticket22191

comment:118 Changed 2 years ago by
Just rebasing on top of 8.5.beta5. Hopefully the patchbot will stop choking on python3.7.2 and we can see if things work for real.
comment:119 Changed 2 years ago by
 Reviewers changed from Dima Pasechnik, Nils Bruin to Dima Pasechnik, Nils Bruin, François Bissey
 Status changed from needs_review to positive_review
Patchbot still breaking on something unrelated to this ticket. Putting to positive review to have some real testing.
comment:120 Changed 2 years ago by
 Status changed from positive_review to needs_work
How is this unrelated (see patchbot)?
[sagelib8.7.beta5] build/cythonized/sage/libs/ecl.c:4814:36: error: 'ecl_sigfpe_handler' undeclared (first use in this function); did you mean 'ecl_sigbus_handler'?
comment:121 Changed 2 years ago by
 Milestone changed from sage8.7 to sage8.8
Ticket retargeted after milestone closed (if you don't believe this ticket is appropriate for the Sage 8.8 release please retarget manually)
comment:122 Changed 2 years ago by
 Milestone changed from sage8.8 to sage8.9
Tickets still needing working or clarification should be moved to the next release milestone at the soonest (please feel free to revert if you think the ticket is close to being resolved).
comment:123 Changed 2 years ago by
Is it possible to revive the current branch? It used to work at some point.
comment:124 Changed 19 months ago by
 Milestone changed from sage8.9 to sage9.1
Ticket retargeted after milestone closed
comment:125 Changed 18 months ago by
on macOS (merged with 9.1.beta3):
ImportError: dlopen(/Users/mkoeppe/s/sage/sagerebasing/worktreealgebraic2018spring/local/lib/python3.7/sitepackages/sage/libs/ecl.cpython37mdarwin.so, 2): Symbol not found: _fedisableexcept Referenced from: /Users/mkoeppe/s/sage/sagerebasing/worktreealgebraic2018spring/local/lib/python3.7/sitepackages/sage/libs/ecl.cpython37mdarwin.so Expected in: flat namespace in /Users/mkoeppe/s/sage/sagerebasing/worktreealgebraic2018spring/local/lib/python3.7/sitepackages/sage/libs/ecl.cpython37mdarwin.so
comment:126 Changed 15 months ago by
 Milestone changed from sage9.1 to sage9.2
comment:127 Changed 15 months ago by
 Description modified (diff)
 Summary changed from update ECL to 16.1.3 to update ECL to 16.1.3 or  rather  20.4.24
comment:128 Changed 14 months ago by
 Branch changed from public/ticket22191 to u/ghspaghettisalat/eclupdate
 Commit changed from 4b4255e39af6d1baf19ba0af9d11e924501946eb to 3f37e8dc6801e78fa79c1cbdc4f5f9a46354c546
 Status changed from needs_work to needs_review
I have created a commit with an updated ECL and implemented a clean solution encapsulating the floating point environment changes using a new macro introduced in ECL 20.4.24 for this purpose (documented at https://commonlisp.net/project/ecl/static/manual/EmbeddingECL.html#ECL_005fWITH_005fLISP_005fFPE).
I have pushed my solution to a new branch to not overwrite the previous changes from this ticket, I hope that's OK and people can see the branch to review it.
comment:129 Changed 14 months ago by
you need to rebase your branch over 9.1. (normally speaking it ought to be based on the current develop branch, which atm is the same as stable 9.1)
noninteractive rebase leads to a broken branch, I just checked. There were warnings about tabs and trailing spaces too. Our Python code only uses spaces.
comment:130 Changed 14 months ago by
needless to say, your branch is most welcome!
comment:131 Changed 14 months ago by
 Branch changed from u/ghspaghettisalat/eclupdate to public/packages/ecl20
 Commit changed from 3f37e8dc6801e78fa79c1cbdc4f5f9a46354c546 to a18783e58b4874c2da4693c0443412d2541f4966
 Status changed from needs_review to needs_work
comment:132 followup: ↓ 133 Changed 14 months ago by
Maxima does not build: There is no package with the name LISP..
:
... Summary: ECL enabled. Executable name: "ecl" default lisp: ecl wish executable name: "wish" Building maxima5.42.2 make[3]: Entering directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src' Making all in admin make[4]: Entering directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/admin' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/admin' Making all in crosscompilewindows make[4]: Entering directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/crosscompilewindows' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/crosscompilewindows' Making all in src make[4]: Entering directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/src' ecl norc eval '(progn (load "../lisputils/defsystem.lisp") (load "../lisputils/makedepends.lisp") (funcall (intern "CREATEDEPENDENCYFILE" :mk) "binaryecl/maxima" "ecldepends.mk") (quit))' ;;; Loading "/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/src/../lisputils/defsystem.lisp" ;;; Loading #P"/home/scratch2/dimpase/sage/sage/local/lib/ecl/cmp.fas" An error occurred during initialization: There is no package with the name LISP.. make bd make[5]: Entering directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/src' ecl norc eval '(progn (load "../lisputils/defsystem.lisp") (load "../lisputils/makedepends.lisp") (funcall (intern "CREATEDEPENDENCYFILE" :mk) "binaryecl/maxima" "ecldepends.mk") (quit))' ;;; Loading "/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/src/../lisputils/defsystem.lisp" ;;; Loading #P"/home/scratch2/dimpase/sage/sage/local/lib/ecl/cmp.fas" An error occurred during initialization: There is no package with the name LISP.. for l in ecl; do for d in / /numerical /numerical/slatec; do /usr/bin/mkdir p binary$l$d; done; done make[5]: Leaving directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/src' ecl norc \ eval '(progn (load "../lisputils/defsystem.lisp") (funcall (intern (symbolname :operateonsystem) :mk) "maxima" :compile :verbose t) (buildmaximalib))' \ eval '(ext:quit)' ;;; Loading "/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/src/../lisputils/defsystem.lisp" ;;; Loading #P"/home/scratch2/dimpase/sage/sage/local/lib/ecl/cmp.fas" An error occurred during initialization: There is no package with the name LISP.. make[4]: *** [Makefile:1350: binaryecl/maxima] Error 1 make[4]: Leaving directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/src' make[3]: *** [Makefile:458: allrecursive] Error 1 make[3]: Leaving directory '/home/scratch2/dimpase/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src' **************************************************************************************************************************************************************************************************************************************************************************************************************************** Error building maxima5.42.2
comment:133 in reply to: ↑ 132 ; followup: ↓ 134 Changed 14 months ago by
Replying to dimpase:
Maxima does not build:
There is no package with the name LISP..
:
I had a patch for that in my original commit. Did it get lost during the rebase?
The error is due to maxima's copy of defsystem using a long obsolete package nickname which has been removed in ECL 20.4.24 and still needs to be reported on the maxima bugtracker.
comment:134 in reply to: ↑ 133 Changed 14 months ago by
Replying to ghspaghettisalat:
Replying to dimpase:
Maxima does not build:
There is no package with the name LISP..
:I had a patch for that in my original commit. Did it get lost during the rebase?
I just took the diff against 9.0 and patched 9.1 with it. In the process I had to rename spkginstall to spkginstall.in, but otherwise everything else just applied without any problems. So it most probably was never in your branch.
The error is due to maxima's copy of defsystem using a long obsolete package nickname which has been removed in ECL 20.4.24 and still needs to be reported on the maxima bugtracker.
the latter has been reported and fixed by Maxima, as I just found. cf. https://sourceforge.net/p/maxima/bugs/3629/
comment:135 Changed 14 months ago by
 Commit changed from a18783e58b4874c2da4693c0443412d2541f4966 to 4f7e1a59e19c46896e51553190ba94d764006c17
Branch pushed to git repo; I updated commit sha1. New commits:
4f7e1a5  backport Maxima fix for bug #3629

comment:136 Changed 14 months ago by
ok, great, a bit of numerical noise, but further seems to be in order. an update soon.
comment:137 Changed 14 months ago by
 Reviewers changed from Dima Pasechnik, Nils Bruin, François Bissey to Marius Gerbershagen, Dima Pasechnik, Nils Bruin, François Bissey
comment:138 Changed 14 months ago by
 Reviewers changed from Marius Gerbershagen, Dima Pasechnik, Nils Bruin, François Bissey to Dima Pasechnik, Nils Bruin, François Bissey
comment:139 Changed 14 months ago by
 Commit changed from 4f7e1a59e19c46896e51553190ba94d764006c17 to e7e7457622e13bb6e67a83df7ff10d36f29c7e5c
Branch pushed to git repo; I updated commit sha1. New commits:
e7e7457  doctest fixes

comment:140 Changed 14 months ago by
 Status changed from needs_work to needs_review
OK, seems to work and pass all tests. Please review
comment:141 followup: ↓ 142 Changed 14 months ago by
 Status changed from needs_review to needs_work
Absense of makeinfo
leads to a building error, cf
https://github.com/dimpase/sage/runs/704594060?check_suite_focus=true
[ecl20.4.24.p0] configure: error: Unable to build the manual: makeinfo not found.
comment:142 in reply to: ↑ 141 Changed 14 months ago by
Replying to dimpase:
Absense of
makeinfo
leads to a building error, cf https://github.com/dimpase/sage/runs/704594060?check_suite_focus=true[ecl20.4.24.p0] configure: error: Unable to build the manual: makeinfo not found.
Some flashback that is!
comment:143 Changed 14 months ago by
Oh right, that was maxima
not ecl
that had problems before with makeinfo
, this is different. That would make it a requirement, which may not be a bad thing (TM).
comment:144 Changed 14 months ago by
 Report Upstream changed from Fixed upstream, but not in a stable release. to Reported upstream. No feedback yet.
comment:145 Changed 14 months ago by
Their configure.ac is buggy, I'm fixing it...
comment:146 Changed 14 months ago by
the submitted fix https://gitlab.com/embeddablecommonlisp/ecl//merge_requests/210
comment:147 Changed 14 months ago by
 Commit changed from e7e7457622e13bb6e67a83df7ff10d36f29c7e5c to 4001aeb51385aaf833315c4d73f925295ecde004
Branch pushed to git repo; I updated commit sha1. New commits:
4001aeb  backport ECL PR #210

comment:148 Changed 14 months ago by
rerunning tests: https://github.com/dimpase/sage/actions
New commits:
4001aeb  backport ECL PR #210

comment:149 Changed 14 months ago by
 Report Upstream changed from Reported upstream. No feedback yet. to Fixed upstream, in a later stable release.
 Status changed from needs_work to needs_review
comment:150 Changed 14 months ago by
 Summary changed from update ECL to 16.1.3 or  rather  20.4.24 to update ECL to 20.4.24
comment:151 Changed 14 months ago by
 Commit changed from 4001aeb51385aaf833315c4d73f925295ecde004 to 266d8c103e7a2905f5532a586e292b7e434eb25e
Branch pushed to git repo; I updated commit sha1. This was a forced push. New commits:
469c14a  rebased over 9.1 branch u/ghspaghettisalat/eclupdate

c75887c  update checksums, add upstream URL

2d71967  renaming the patch, tbd if it is still needed

0076bc3  backport Maxima fix for bug #3629

1d074e8  doctest fixes

266d8c1  backport ECL PR #210

comment:152 Changed 14 months ago by
 Cc mjo added
 Priority changed from major to critical
Could someone please review this? (rebased over current beta)
New commits:
469c14a  rebased over 9.1 branch u/ghspaghettisalat/eclupdate

c75887c  update checksums, add upstream URL

2d71967  renaming the patch, tbd if it is still needed

0076bc3  backport Maxima fix for bug #3629

1d074e8  doctest fixes

266d8c1  backport ECL PR #210

comment:153 Changed 14 months ago by
 Description modified (diff)
Updated the goddamn tarball address...
Changed 14 months ago by
comment:154 Changed 14 months ago by
 Reviewers changed from Dima Pasechnik, Nils Bruin, François Bissey to Dima Pasechnik, Nils Bruin, François Bissey, Emmanuel Charpentier
 Status changed from needs_review to positive_review
On Debian testing running on core i7 + 16 GB RAM using the system packages recommended by README.md}}, {{{ptestlong
on the present branch raises the same failures already reported for 5.2.beta0 on the same machine.
These failures are similar to those reported for 9.1.rc3 and explained away by Jonathan Kliem.
Rerunning the failed/timed out doctests show that the timed out one pass and all others persist to fail ; see attached chkerrs22191.txt
.
This branch results do not seem to differ from thos of 9.2.beta0 as far as ECL might be concerned.
==> (tentative) positive_review
. As in other cases, a check on a system using Sage packages (i. e. one on whichg ptestlong
raises no failures) would be useful.
comment:155 Changed 14 months ago by
 Description modified (diff)
comment:156 Changed 14 months ago by
 Description modified (diff)
comment:157 followup: ↓ 158 Changed 14 months ago by
 Status changed from positive_review to needs_work
Compile fails on macOS:
[ecl20.4.24.p0] manual.txi:13: warning: unrecognized encoding name `UTF8'. [ecl20.4.24.p0] /Users/mkoeppe/s/sage/sagerebasing/worktreealgebraic2018spring/local/var/tmp/sage/build/ecl20.4.24.p0/src/build/doc/manual//userguide/invoking.txi:58: Unknown command `inlinefmtifelse'. [ecl20.4.24.p0] /Users/mkoeppe/s/sage/sagerebasing/worktreealgebraic2018spring/local/var/tmp/sage/build/ecl20.4.24.p0/src/build/doc/manual//userguide/invoking.txi:58: Misplaced {. [ecl20.4.24.p0] /Users/mkoeppe/s/sage/sagerebasing/worktreealgebraic2018spring/local/var/tmp/sage/build/ecl20.4.24.p0/src/build/doc/manual//userguide/invoking.txi:58: Misplaced }. ... [ecl20.4.24.p0] Too many errors! Gave up. [ecl20.4.24.p0] make[5]: *** [ecl.info.gz] Error 1 [ecl20.4.24.p0] make[4]: *** [info] Error 2 [ecl20.4.24.p0] make[3]: *** [doc] Error 2 [ecl20.4.24.p0] make[2]: *** [all] Error 2 [ecl20.4.24.p0] ******************************************************************************** [ecl20.4.24.p0] Error building ecl20.4.24.p0 [ecl20.4.24.p0] ********************************************************************************
comment:158 in reply to: ↑ 157 Changed 14 months ago by
Replying to mkoeppe:
Compile fails on macOS:
[ecl20.4.24.p0] manual.txi:13: warning: unrecognized encoding name `UTF8'. [ecl20.4.24.p0] /Users/mkoeppe/s/sage/sagerebasing/worktreealgebraic2018spring/local/var/tmp/sage/build/ecl20.4.24.p0/src/build/doc/manual//userguide/invoking.txi:58: Unknown command `inlinefmtifelse'. [ecl20.4.24.p0] /Users/mkoeppe/s/sage/sagerebasing/worktreealgebraic2018spring/local/var/tmp/sage/build/ecl20.4.24.p0/src/build/doc/manual//userguide/invoking.txi:58: Misplaced {. [ecl20.4.24.p0] /Users/mkoeppe/s/sage/sagerebasing/worktreealgebraic2018spring/local/var/tmp/sage/build/ecl20.4.24.p0/src/build/doc/manual//userguide/invoking.txi:58: Misplaced }. ... [ecl20.4.24.p0] Too many errors! Gave up. [ecl20.4.24.p0] make[5]: *** [ecl.info.gz] Error 1 [ecl20.4.24.p0] make[4]: *** [info] Error 2 [ecl20.4.24.p0] make[3]: *** [doc] Error 2 [ecl20.4.24.p0] make[2]: *** [all] Error 2 [ecl20.4.24.p0] ******************************************************************************** [ecl20.4.24.p0] Error building ecl20.4.24.p0 [ecl20.4.24.p0] ********************************************************************************
What does makeinfo version report?
comment:159 Changed 14 months ago by
IIRC I saw a similar weird error in case of a broken texinfo installation.
comment:160 Changed 14 months ago by
With Homebrew, a setup that works for me is with texinfo installed, and
/usr/local/Cellar/texinfo/6.7/bin
coming early in PATH, so that the native makeinfo is not used.
comment:161 Changed 14 months ago by
To make it accessible to more users, how about using ./configure enablemanual=no
? Or use this if the version of makeinfo
is too old?
The system version of makeinfo on OS X:
% makeinfo version makeinfo (GNU texinfo) 4.8 Copyright (C) 2004 Free Software Foundation, Inc. There is NO warranty. You may redistribute this software under the terms of the GNU General Public License. For more information about these matters, see the files named COPYING.
comment:162 Changed 14 months ago by
 Commit changed from 266d8c103e7a2905f5532a586e292b7e434eb25e to 12447bc4ba5e9443a95ac0bb4b2fe916410e3c6f
Branch pushed to git repo; I updated commit sha1. New commits:
12447bc  reject old makeinfo

comment:163 followup: ↓ 169 Changed 14 months ago by
 Status changed from needs_work to needs_review
OK, this does the trick. Another question whether on Homebrew we want to recommend installing texinfo, and do

.homebrewbuildenv
a b 2 2 # that activate kegonly homebrew package installations 3 3 4 4 HOMEBREW=`brew prefix`  return 1 5 for l in gettext; do5 for l in texinfo gettext; do 6 6 if [ d "$HOMEBREW/opt/$l/bin" ]; then 7 7 PATH="$HOMEBREW/opt/$l/bin:$PATH" 8 8 fi
comment:164 followup: ↓ 165 Changed 14 months ago by
Do you need/want another check on Debian ?
comment:165 in reply to: ↑ 164 ; followup: ↓ 166 Changed 14 months ago by
Replying to charpent:
Do you need/want another check on Debian ?
Yes, with the optional packages dependent on ecl, please  fricas
and kenzo
comment:166 in reply to: ↑ 165 ; followup: ↓ 167 Changed 14 months ago by
comment:167 in reply to: ↑ 166 Changed 14 months ago by
Replying to charpent:
Replying to dimpase:
Replying to charpent:
Do you need/want another check on Debian ?
Yes, with the optional packages dependent on ecl, please 
fricas
andkenzo
Underway. Expect about 3 hours...
The build phase of time make ptestlong
doesn't seem to have changed anything. I'll keep it running in order to test kenzo
(not in my initial setup...).
Changed 14 months ago by
comment:168 Changed 14 months ago by
Well,that was faster than expexcted.
I get the same 11 permanent failures as reported for 2.0.beta1. See checkerrsV2.txt
for details.
==>Nihil obstat for positive_review
, but I won't put it myself (someone testing this on a Mac might...).
comment:169 in reply to: ↑ 163 Changed 14 months ago by
Replying to dimpase:
Another question whether on Homebrew we want to recommend installing texinfo, and do
.homebrewbuildenv
a b 2 2 # that activate kegonly homebrew package installations 3 3 4 4 HOMEBREW=`brew prefix`  return 1 5 for l in gettext; do5 for l in texinfo gettext; do 6 6 if [ d "$HOMEBREW/opt/$l/bin" ]; then 7 7 PATH="$HOMEBREW/opt/$l/bin:$PATH" 8 8 fi
I think this should go to #29557 (Add script package _recommended
and generate "recommended system packages" info)  having a current texinfo should be on the same footing as having an installation of texlive etc.
comment:170 followup: ↓ 171 Changed 14 months ago by
 Status changed from needs_review to positive_review
Builds OK now on macOS. I haven't tested or looked at anything else in this ticket. Resetting to charpent's tentative positive review.
comment:171 in reply to: ↑ 170 ; followup: ↓ 174 Changed 14 months ago by
Replying to mkoeppe:
Builds OK now on macOS. I haven't tested or looked at anything else in this ticket. Resetting to charpent's tentative positive review.
You should add your name in the "Reviewers" field (I tend to forget this pretty regularly, and get reminded by kcrisman
equally regularly...).
comment:172 Changed 14 months ago by
comment:173 Changed 14 months ago by
 Reviewers changed from Dima Pasechnik, Nils Bruin, François Bissey, Emmanuel Charpentier to Dima Pasechnik, Nils Bruin, François Bissey, Emmanuel Charpentier, Matthias Koeppe
comment:174 in reply to: ↑ 171 Changed 14 months ago by
Replying to charpent:
You should add your name in the "Reviewers" field (I tend to forget this pretty regularly, and get reminded by
kcrisman
equally regularly...).
Thanks, done.
comment:175 Changed 14 months ago by
 Status changed from positive_review to needs_work
comment:176 followup: ↓ 178 Changed 14 months ago by
Tests at https://github.com/mkoeppe/sage/runs/745921410:
On ubuntutrustystandard
:
In file included from /sage/local/var/tmp/sage/build/ecl20.4.24.p0/src/src/c/cfun.d:18:0: /sage/local/var/tmp/sage/build/ecl20.4.24.p0/src/src/c/cfun_dispatch.d: In function 'fixed_dispatch1': /sage/local/var/tmp/sage/build/ecl20.4.24.p0/src/src/c/cfun_dispatch.d:92:3: error: 'for' loop initial declarations are only allowed in C99 mode for (int i = 0; i < 1; i++) ^
Likewise in debianjessiestandard
(https://github.com/mkoeppe/sage/runs/745921476)
comment:177 followups: ↓ 181 ↓ 183 Changed 14 months ago by
And on ubuntuxenialstandard
(https://github.com/mkoeppe/sage/runs/745921419), maxima
fails:
ecl norc \ eval '(progn (load "../lisputils/defsystem.lisp") (funcall (intern (symbolname :operateonsystem) :mk) "maxima" :compile :verbose t) (buildmaximalib))' \ eval '(ext:quit)' Internal or unrecoverable error in: Can't set the size of the C stack ;;; ECL C Backtrace ;;; /sage/local/lib/libecl.so.20.4(_ecl_dump_c_backtrace+0x22) [0x14564d659042] ;;; /sage/local/lib/libecl.so.20.4(ecl_internal_error+0x41) [0x14564d647431] ;;; /sage/local/lib/libecl.so.20.4(+0x1d0a20) [0x14564d66fa20] ;;; /sage/local/lib/libecl.so.20.4(ecl_cs_set_org+0x5d) [0x14564d66fe9d] ;;; /sage/local/lib/libecl.so.20.4(cl_boot+0x15c) [0x14564d53581c] ;;; ecl() [0x40090a] ;;; /lib/x86_64linuxgnu/libc.so.6(__libc_start_main+0xf0) [0x14564d0f5830] ;;; ecl() [0x4009f9] Makefile:1349: recipe for target 'binaryecl/maxima' failed make[3]: *** [binaryecl/maxima] Aborted (core dumped)
comment:178 in reply to: ↑ 176 ; followup: ↓ 188 Changed 14 months ago by
Replying to mkoeppe:
Tests at https://github.com/mkoeppe/sage/runs/745921410:
On
ubuntutrustystandard
:In file included from /sage/local/var/tmp/sage/build/ecl20.4.24.p0/src/src/c/cfun.d:18:0: /sage/local/var/tmp/sage/build/ecl20.4.24.p0/src/src/c/cfun_dispatch.d: In function 'fixed_dispatch1': /sage/local/var/tmp/sage/build/ecl20.4.24.p0/src/src/c/cfun_dispatch.d:92:3: error: 'for' loop initial declarations are only allowed in C99 mode for (int i = 0; i < 1; i++) ^Likewise in
debianjessiestandard
(https://github.com/mkoeppe/sage/runs/745921476)
xenial is long past EOL (oops, more precisely, past End of Support). jessie is past EOL, and jessie LTS will be EOL in less than a month.
If the C compiler there defaults to c89 mode, I don't see why we should care.
comment:179 Changed 14 months ago by
I've left a comment on https://gitlab.com/embeddablecommonlisp/ecl//issues/484 (cleanup: consider removing c89 validation from buildsystem)
comment:180 Changed 14 months ago by
 Report Upstream changed from Fixed upstream, in a later stable release. to Reported upstream. No feedback yet.
https://gitlab.com/embeddablecommonlisp/ecl//merge_requests/214 adds a c99fix upstream
comment:181 in reply to: ↑ 177 Changed 14 months ago by
Replying to mkoeppe:
And on
ubuntuxenialstandard
(https://github.com/mkoeppe/sage/runs/745921419),maxima
fails:ecl norc \ eval '(progn (load "../lisputils/defsystem.lisp") (funcall (intern (symbolname :operateonsystem) :mk) "maxima" :compile :verbose t) (buildmaximalib))' \ eval '(ext:quit)' Internal or unrecoverable error in: Can't set the size of the C stack ...
I can reproduce this on arando buildbot  which is an Ubuntu Xenial Bionic 32bit machine.
So this seems to do more with OS than anything else.
comment:182 Changed 14 months ago by
issue in comment:181 is reproducble without Sage, just ECL and Maxima: I filed https://gitlab.com/embeddablecommonlisp/ecl//issues/596
comment:183 in reply to: ↑ 177 ; followup: ↓ 184 Changed 14 months ago by
Replying to mkoeppe:
And on
ubuntuxenialstandard
(https://github.com/mkoeppe/sage/runs/745921419),
this says
20200606T21:39:17.5489746Z Ubuntu 20200606T21:39:17.5489978Z 18.04.4
which is Bionic, not Xenial (cf https://wiki.ubuntu.com/Releases), so I don't know why this is mixed up.
maxima
fails:
...
comment:184 in reply to: ↑ 183 Changed 14 months ago by
Replying to dimpase:
Replying to mkoeppe:
on
ubuntuxenialstandard
(https://github.com/mkoeppe/sage/runs/745921419),this says
20200606T21:39:17.5489746Z Ubuntu 20200606T21:39:17.5489978Z 18.04.4which is Bionic, not Xenial (cf https://wiki.ubuntu.com/Releases), so I don't know why this is mixed up.
You're looking in the wrong place. The GitHub runner is on Ubuntu, but the test is in a Docker container running xenial
Digest: sha256:db6697a61d5679b7ca69dbde3dad6be0d17064d5b6b0e9f7be8d456ebb337209 Status: Downloaded newer image for ubuntu:xenial
comment:185 followup: ↓ 187 Changed 14 months ago by
as mentioned in https://trac.sagemath.org/ticket/23011#comment:15
sage with ecls20.4.24/maxima5.44.0
fails to build because ECL_OPT_TRAP_SIGCHLD
is gone
comment:186 Changed 14 months ago by
 Commit changed from 12447bc4ba5e9443a95ac0bb4b2fe916410e3c6f to a3e0eca1690d463a8aeef9cac915f9fe6ff8baea
Branch pushed to git repo; I updated commit sha1. New commits:
a3e0eca  add upstream fix from MR 215

comment:187 in reply to: ↑ 185 Changed 14 months ago by
 Status changed from needs_work to needs_review
Replying to ghsheerluck:
as mentioned in https://trac.sagemath.org/ticket/23011#comment:15
sage with ecls20.4.24/maxima5.44.0 fails to build because
ECL_OPT_TRAP_SIGCHLD
is gone
we're still on Maxima 5.42.2, and it works with this ecl.
Upstream fix for Ubuntu xenial is addded, please review.
comment:188 in reply to: ↑ 178 ; followup: ↓ 191 Changed 14 months ago by
Replying to dimpase:
If the C compiler there defaults to c89 mode, I don't see why we should care.
Certainly we should care about the bug that our compiler flags that are part of $CC are not passed on correctly...
comment:189 Changed 14 months ago by
right, I forgot the patch I made on https://gitlab.com/embeddablecommonlisp/ecl//merge_requests/214  I should add it too.
comment:190 Changed 14 months ago by
 Status changed from needs_review to needs_work
comment:191 in reply to: ↑ 188 ; followup: ↓ 195 Changed 14 months ago by
Replying to mkoeppe:
Replying to dimpase:
If the C compiler there defaults to c89 mode, I don't see why we should care.
Certainly we should care about the bug that our compiler flags that are part of $CC are not passed on correctly...
by the way, ECL sets CFLAGS
in its c/Makefile.in
without taking $CFLAGS
into account, only @CFLAGS@
. What would be the correct setting? To take $CFLAGS
in in Makefile
, or in ./configure
?
comment:192 Changed 14 months ago by
 Commit changed from a3e0eca1690d463a8aeef9cac915f9fe6ff8baea to 89b006b106ca050240f580cb80d2a6320e5ade2e
Branch pushed to git repo; I updated commit sha1. New commits:
89b006b  add the patch from upstream MR 214

comment:193 Changed 14 months ago by
 Status changed from needs_work to positive_review
OK, now std=c99 should be enforced in ECL, too.
comment:194 Changed 14 months ago by
 Status changed from positive_review to needs_review
comment:195 in reply to: ↑ 191 ; followup: ↓ 196 Changed 14 months ago by
Replying to dimpase:
ECL sets
CFLAGS
in itsc/Makefile.in
without taking$CFLAGS
into account, only@CFLAGS@
. What would be the correct setting? To take$CFLAGS
in inMakefile
, or in./configure
?
Well, as ECL is not using automake, I guess one cannot expect automake features such as being able to pass user CFLAGS to make
without breaking things.
So one needs to set user CFLAGS before running ./configure
.
comment:196 in reply to: ↑ 195 Changed 14 months ago by
Replying to mkoeppe:
Replying to dimpase:
ECL sets
CFLAGS
in itsc/Makefile.in
without taking$CFLAGS
into account, only@CFLAGS@
. What would be the correct setting? To take$CFLAGS
in inMakefile
, or in./configure
?Well, as ECL is not using automake, I guess one cannot expect automake features such as being able to pass user CFLAGS to
make
without breaking things. So one needs to set user CFLAGS before running./configure
.
anyhow 89b006b does the job, it's more a question of improving ECL further.
comment:197 Changed 14 months ago by
comment:198 Changed 14 months ago by
 Status changed from needs_review to positive_review
Looking good.
comment:199 Changed 14 months ago by
On Linux/macOS, that is.
However, on Cygwin (https://github.com/mkoeppe/sage/runs/765619947), I am getting:
;; Compiling /cygdrive/d/a/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/src/numerical/slatec/dqawc.lisp. ;;; OPTIMIZE levels: Safety=2, Space=0, Speed=3, Debug=2 ;;; ;;; End of Pass 1. ;;; Finished compiling /cygdrive/d/a/sage/sage/local/var/tmp/sage/build/maxima5.42.2/src/src/numerical/slatec/dqawc.lisp. ;;; 1 [main] ecl 57306 child_info_fork::abort: address space needed by 'eclcTpROy.dll' (0x190000) is already occupied An error occurred during initialization: Could not spawn subprocess to run "gcc".. make[3]: *** [Makefile:1350: binaryecl/maxima] Error 1
comment:200 Changed 14 months ago by
 Status changed from positive_review to needs_work
comment:201 Changed 14 months ago by
strange. looks like a temporary dll created for some reason. Anyhow, this could come from a BLODA routine breaking Cygwin fork.
comment:202 Changed 14 months ago by
Damn, looks like changes I made after we release tested on cygwin to fix compiler issues for msvc broke cygwin compilation. Merge request https://gitlab.com/embeddablecommonlisp/ecl//merge_requests/216 contains a fix for that.
comment:203 Changed 14 months ago by
We should be able to use abs tol
to futureproof tests like these,
 [0.5,0.55511151231257...e14,21,0] + [0.5,5.5511151231257...e15,21,0]
More generally, there are a lot of e.g. maxima tests that check for a particular output string when a boolean comparison (actual == expected)
that checks for True
would be more reliable. When we start accepting system installations of maxima this will become more annoying.
comment:204 Changed 14 months ago by
 Commit changed from 89b006b106ca050240f580cb80d2a6320e5ade2e to 0b777377289ba21166ea8d4f647e38e8b6ea1d23
Branch pushed to git repo; I updated commit sha1. New commits:
0b77737  add upstream MR 216 (to fix cygwin fork)

comment:205 followup: ↓ 208 Changed 14 months ago by
OK, I've added this patch to the branch  however, on a Gentoo box I tried this branch (with and without the last commit) running Sage tests comes to a grinding halt due to a lot of zombie Maxima processes eating up CPU and RAM.
I wonder whether this is reproducible on a mainstream Linux.
comment:206 Changed 14 months ago by
it looks as if after a doctest crash (or perhaps even without one) a running maxima process related to it does not always get cleaned up. I don't know much about sagecleaner script  but it is active during the test run.
Thanks goodness it turned out to be a red herring. Well, almost  I had an alive instance of sagecleaner from a previous test, and starting a new test run did not clean it (which probably is a bug), so a new sagecleaner didn't start, and the old one didn't do anything useful for the current test run.
comment:207 followup: ↓ 219 Changed 14 months ago by
Cygwin test runs at https://github.com/mkoeppe/sage/actions/runs/134541665
comment:208 in reply to: ↑ 205 Changed 14 months ago by
comment:209 followup: ↓ 210 Changed 14 months ago by
it's not quite clear how to add Gentoo, which is meant to be built from source, from ground up. Yes, one can get an image from https://hub.docker.com/r/gentoo/stage3amd64/  but adding Sage dependencies means building them from source. Anything short of a custom image won't work, I think.
comment:210 in reply to: ↑ 209 ; followup: ↓ 211 Changed 14 months ago by
Replying to dimpase:
it's not quite clear how to add Gentoo, which is meant to be built from source, from ground up. Yes, one can get an image from https://hub.docker.com/r/gentoo/stage3amd64/  but adding Sage dependencies means building them from source.
That's fine  why would that take longer than the 6h that our minimal
builds take? Presumably the image has the compilers already?
comment:211 in reply to: ↑ 210 ; followup: ↓ 214 Changed 13 months ago by
Replying to mkoeppe:
Replying to dimpase:
it's not quite clear how to add Gentoo, which is meant to be built from source, from ground up. Yes, one can get an image from https://hub.docker.com/r/gentoo/stage3amd64/  but adding Sage dependencies means building them from source.
That's fine  why would that take longer than the 6h that our
minimal
builds take? Presumably the image has the compilers already?
right, I presume it has some kind of a toolchain, but how can we talk about standard
builds?
comment:212 Changed 13 months ago by
 Status changed from needs_work to needs_review
comment:213 Changed 13 months ago by
 Report Upstream changed from Reported upstream. No feedback yet. to Fixed upstream, but not in a stable release.
comment:214 in reply to: ↑ 211 Changed 13 months ago by
Replying to dimpase:
but how can we talk about
standard
builds?
Same as on all other platforms: We install system packages first  it does not make difference that they are built from source rather than downloaded as a binary.
comment:215 followup: ↓ 216 Changed 13 months ago by
I vote for François Bissey aka @fbissey aka @kiwifb (solo contributor to sageongentoo
) to deal with gentooondocker stuff (maybe by creating stage4amd64 image, so only scimathematics/sage
package would be built from source, and all the rest would come FROM fbissey/sageongentoostage4:latest
)
comment:216 in reply to: ↑ 215 Changed 13 months ago by
Replying to ghsheerluck:
I vote for François Bissey aka @fbissey aka @kiwifb (solo contributor to
sageongentoo
) to deal with gentooondocker stuff (maybe by creating stage4amd64 image, so onlyscimathematics/sage
package would be built from source, and all the rest would comeFROM fbissey/sageongentoostage4:latest
)
Thanks for nominating me :(
Being solo for most (but not all) of the last 12 years has not been without its ups and downs. I could even use the word burnout for a few periods. On top of that, I don't have an academic style position and I don't have all the time I would like. I am currently a one man eResearch department (doing solo must be my things  kidding we were almost ready to get me a collaborator when a change at the top lead to cancelling all ongoing hiring processes, even for stuff like me that have a truck factor of one). I currently have to deal with stuff like strategic planning, data management, cloud provisioning, HPCCF, carpentries... I sometimes call myself an undertaker. I do all the stuff other people don't want to do. There is a moment where you learn the word "no".
So, thank you very much but I would very much prefer a helper.
comment:217 Changed 13 months ago by
Thanks for all you do François. I don't even want to think about how much harder it would be to maintain sage in nixpkgs without all your work. I can attest that solomaintaining sage can be a bunch some times. sage on nixpkgs is still stuck to 8.9 due to the notquitepy3 switch in 9.0.
Sorry for derailing the topic further, but sometimes a thanks is in order. Thanks.
comment:218 Changed 13 months ago by
comment:219 in reply to: ↑ 207 Changed 13 months ago by
Replying to mkoeppe:
Cygwin test runs at https://github.com/mkoeppe/sage/actions/runs/134541665
Maxima now succeeds to build on Cygwin (stageiib, https://github.com/mkoeppe/sage/runs/768953492), but the Sage testsuite (stageiva) fails with various Maximarelated errors. (There are also many GIACrelated failures, but that's for another ticket)
sage t src/doc/en/constructions/plotting.rst # 3 doctests failed sage t src/doc/en/tutorial/tour_algebra.rst # 2 doctests failed sage t src/doc/ja/tutorial/interfaces.rst # Timed out sage t src/doc/ru/tutorial/tour_algebra.rst # 2 doctests failed sage t src/doc/ru/tutorial/interfaces.rst # 7 doctests failed sage t src/sage/calculus/desolvers.py # 1 doctest failed sage t src/sage/coding/binary_code.pyx # Timed out sage t src/sage/doctest/control.py # 1 doctest failed sage t src/sage/functions/error.py # 1 doctest failed sage t src/sage/functions/orthogonal_polys.py # 2 doctests failed sage t src/sage/groups/class_function.py # Timed out sage t src/sage/interfaces/giac.py # 49 doctests failed sage t src/sage/interfaces/quit.py # 4 doctests failed sage t src/sage/interfaces/maxima_abstract.py # 3 doctests failed sage t src/sage/libs/gap/element.pyx # 1 doctest failed sage t src/sage/libs/glpk/error.pyx # 2 doctests failed sage t src/sage/matrix/matrix1.pyx # 1 doctest failed sage t src/sage/numerical/backends/glpk_backend.pyx # 2 doctests failed sage t src/sage/repl/interpreter.py # 2 doctests failed sage t src/sage/rings/number_field/number_field_element.pyx # Timed out sage t src/sage/symbolic/assumptions.py # 1 doctest failed sage t src/sage/symbolic/expression.pyx # 1 doctest failed sage t src/sage/symbolic/maxima_wrapper.py # 2 doctests failed sage t src/sage/tests/benchmark.py # 1 doctest failed sage t src/sage/tests/books/computationalmathematicswithsagemath/sol/graphique_doctest.py # 1 doctest failed sage t src/sage/tests/cmdline.py # 3 doctests failed
Examples of the errors (see logs for more):
sage t src/sage/functions/error.py ********************************************************************** File "src/sage/functions/error.py", line 149, in sage.functions.error.Function_erf Failed example: merf = maxima(erf(x)).sage().operator() Expected nothing Got: Maxima crashed  automatically restarting. sage t src/sage/functions/orthogonal_polys.py ********************************************************************** File "src/sage/functions/orthogonal_polys.py", line 876, in sage.functions.orthogonal_polys.Func_chebyshev_U.__init__ Failed example: maxima(chebyshev_U(2,x, hold=True)) Exception raised: ... File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 296, in __call__ return cls(self, x, name=name) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 1157, in __init__ ExpectElement.__init__(self, parent, value, is_name=False, name=None) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1469, in __init__ self._name = parent._create(value, name=name) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 501, in _create self.set(name, value) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 1002, in set self._eval_line(cmd) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 788, in _eval_line assert line_echo.strip().endswith(line.strip()), 'mismatch:\n' + line_echo + line AssertionError: mismatch: sage5 : chebyshev_u(2,_SAGE_VAR_x)$
comment:220 Changed 13 months ago by
 Status changed from needs_review to needs_work
comment:221 followup: ↓ 225 Changed 13 months ago by
this shoud be easy to reproduce without Sage. Is there a Docker container created by GH Actions to download and try on Windows?
comment:222 Changed 13 months ago by
The workflow for Cygwin does not use Docker. There is a "sagelocal" artifact that one can download.
comment:223 Changed 13 months ago by
Trying to compile sage 9.1 with ECL 20.4.24 and Maxima 5.44.0 as external packages produces these errors:
build/cythonized/sage/libs/ecl.c:3734:57: error: use of undeclared identifier 'ECL_OPT_TRAP_SIGCHLD'; did you mean 'ECL_OPT_TRAP_SIGILL'? __pyx_t_3 = __Pyx_PyInt_From_cl_fixnum(ecl_get_option(ECL_OPT_TRAP_SIGCHLD)); if (unlikely(!__pyx_t_3)) __PYX_ERR(0, 180, __pyx_L1_error) ^~~~~~~~~~~~~~~~~~~~ ECL_OPT_TRAP_SIGILL /usr/local/include/ecl/external.h:972:9: note: 'ECL_OPT_TRAP_SIGILL' declared here ECL_OPT_TRAP_SIGILL, ^ build/cythonized/sage/libs/ecl.c:4406:57: error: use of undeclared identifier 'ECL_OPT_SIGALTSTACK_SIZE' __pyx_t_3 = __Pyx_PyInt_From_cl_fixnum(ecl_get_option(ECL_OPT_SIGALTSTACK_SIZE)); if (unlikely(!__pyx_t_3)) __PYX_ERR(0, 208, __pyx_L1_error) ^ build/cythonized/sage/libs/ecl.c:4731:18: error: use of undeclared identifier 'ECL_OPT_TRAP_SIGCHLD'; did you mean 'ECL_OPT_TRAP_SIGILL'? ecl_set_option(ECL_OPT_TRAP_SIGCHLD, 0); ^~~~~~~~~~~~~~~~~~~~ ECL_OPT_TRAP_SIGILL /usr/local/include/ecl/external.h:972:9: note: 'ECL_OPT_TRAP_SIGILL' declared here ECL_OPT_TRAP_SIGILL, ^ 3 errors generated.
comment:224 Changed 13 months ago by
comment:225 in reply to: ↑ 221 ; followup: ↓ 226 Changed 13 months ago by
Replying to dimpase:
this shoud be easy to reproduce without Sage. Is there a Docker container created by GH Actions to download and try on Windows?
Has this been reported upstream?
comment:226 in reply to: ↑ 225 Changed 13 months ago by
Replying to mkoeppe:
Replying to dimpase:
this shoud be easy to reproduce without Sage. Is there a Docker container created by GH Actions to download and try on Windows?
Has this been reported upstream?
ghspaghettisalat (a.k.a. Marius) is a core upstream developer  but just in case I made https://gitlab.com/embeddablecommonlisp/ecl//issues/599
comment:227 followup: ↓ 229 Changed 13 months ago by
Compiling this branch against our system threadedenabled ecl gives multiple segfaults when running the test suite. Running the tests manually works fine. Running against system ecl used to work fine with the version of this branch pre20.04 upgrade
/usr/lib/python3.8/sitepackages/cysignals/signals.cpython38x86_64linuxgnu.so(+0x729d)[0x7f803914129d] /usr/lib/python3.8/sitepackages/cysignals/signals.cpython38x86_64linuxgnu.so(+0x748c)[0x7f803914148c] /usr/lib/python3.8/sitepackages/cysignals/signals.cpython38x86_64linuxgnu.so(+0x9f05)[0x7f8039143f05] /usr/lib/libc.so.6(+0x3c3e0)[0x7f803a6ad3e0] /usr/lib/libecl.so.20.4(ecl_extend_hashtable+0x11a)[0x7f7fdc1d55da] /usr/lib/libecl.so.20.4(+0x203947)[0x7f7fdc1d5947] /usr/lib/libecl.so.20.4(cl_export2+0x36c)[0x7f7fdc176aac] /usr/lib/libecl.so.20.4(init_all_symbols+0x29c)[0x7f7fdc071cec] /usr/lib/libecl.so.20.4(cl_boot+0x433)[0x7f7fdc0709c3] /usr/lib/python3.8/sitepackages/sage/libs/ecl.cpython38x86_64linuxgnu.so(+0xc85e)[0x7f7fdc4f585e] /usr/lib/python3.8/sitepackages/sage/libs/ecl.cpython38x86_64linuxgnu.so(+0xa9f4)[0x7f7fdc4f39f4] /usr/lib/python3.8/sitepackages/sage/libs/ecl.cpython38x86_64linuxgnu.so(+0x81b0)[0x7f7fdc4f11b0] /usr/lib/libpython3.8.so.1.0(PyModule_ExecDef+0x78)[0x7f803aa06ae8] /usr/lib/libpython3.8.so.1.0(+0x1cea50)[0x7f803aa06a50] /usr/lib/libpython3.8.so.1.0(+0x12dd9f)[0x7f803a965d9f] /usr/lib/libpython3.8.so.1.0(PyVectorcall_Call+0x6f)[0x7f803a976a7f] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x601a)[0x7f803a95b98a] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304)[0x7f803a954654] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x19d)[0x7f803a96687d] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x4cc5)[0x7f803a95a635] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x398)[0x7f803a955d08] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x398)[0x7f803a955d08] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(+0x12e02f)[0x7f803a96602f] /usr/lib/libpython3.8.so.1.0(_PyObject_CallMethodIdObjArgs+0x126)[0x7f803a979136] /usr/lib/libpython3.8.so.1.0(PyImport_ImportModuleLevelObject+0x4c0)[0x7f803a977e20] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x469a)[0x7f803a95a00a] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304)[0x7f803a954654] /usr/lib/libpython3.8.so.1.0(PyEval_EvalCode+0x23)[0x7f803aa04b03] /usr/lib/libpython3.8.so.1.0(+0x1d1e0d)[0x7f803aa09e0d] /usr/lib/libpython3.8.so.1.0(+0x12f098)[0x7f803a967098] /usr/lib/libpython3.8.so.1.0(PyVectorcall_Call+0x6f)[0x7f803a976a7f] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x601a)[0x7f803a95b98a] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304)[0x7f803a954654] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x19d)[0x7f803a96687d] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x4cc5)[0x7f803a95a635] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x398)[0x7f803a955d08] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x398)[0x7f803a955d08] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(+0x12e02f)[0x7f803a96602f] /usr/lib/libpython3.8.so.1.0(_PyObject_CallMethodIdObjArgs+0x126)[0x7f803a979136] /usr/lib/libpython3.8.so.1.0(PyImport_ImportModuleLevelObject+0x4c0)[0x7f803a977e20] /usr/lib/libpython3.8.so.1.0(+0x165b18)[0x7f803a99db18] /usr/lib/libpython3.8.so.1.0(PyCFunction_Call+0x7e)[0x7f803a96c8ce] /usr/lib/python3.8/sitepackages/sage/misc/lazy_import.cpython38x86_64linuxgnu.so(+0x7e6a)[0x7f80393abe6a] /usr/lib/python3.8/sitepackages/sage/misc/lazy_import.cpython38x86_64linuxgnu.so(+0xc5f4)[0x7f80393b05f4] /usr/lib/python3.8/sitepackages/sage/misc/lazy_import.cpython38x86_64linuxgnu.so(+0x12f31)[0x7f80393b6f31] /usr/lib/python3.8/sitepackages/sage/structure/sage_object.cpython38x86_64linuxgnu.so(+0x16343)[0x7f8039d9d343] /usr/lib/python3.8/sitepackages/sage/symbolic/expression.cpython38x86_64linuxgnu.so(+0x3495b)[0x7f7fe6dc795b] /usr/lib/python3.8/sitepackages/sage/symbolic/expression.cpython38x86_64linuxgnu.so(+0x3df9e)[0x7f7fe6dd0f9e] /usr/lib/libpython3.8.so.1.0(PyCFunction_Call+0x7e)[0x7f803a96c8ce] /usr/lib/python3.8/sitepackages/sage/symbolic/expression.cpython38x86_64linuxgnu.so(+0x325f7)[0x7f7fe6dc55f7] /usr/lib/python3.8/sitepackages/sage/symbolic/expression.cpython38x86_64linuxgnu.so(+0x36733)[0x7f7fe6dc9733] /usr/lib/libpython3.8.so.1.0(PyCFunction_Call+0x7e)[0x7f803a96c8ce] /usr/lib/libpython3.8.so.1.0(_PyObject_MakeTpCall+0x45c)[0x7f803a95f18c] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x5108)[0x7f803a95aa78] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304)[0x7f803a954654] /usr/lib/libpython3.8.so.1.0(_PyFunction_FastCallDict+0x1f6)[0x7f803a91a392] /usr/lib/python3.8/sitepackages/sage/symbolic/expression.cpython38x86_64linuxgnu.so(+0x564f2)[0x7f7fe6de94f2] /usr/lib/libpython3.8.so.1.0(PyCFunction_Call+0x7e)[0x7f803a96c8ce] /usr/lib/libpython3.8.so.1.0(_PyObject_MakeTpCall+0x45c)[0x7f803a95f18c] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x5108)[0x7f803a95aa78] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304)[0x7f803a954654] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x19d)[0x7f803a96687d] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x398)[0x7f803a955d08] /usr/lib/python3.8/sitepackages/sage/structure/parent.cpython38x86_64linuxgnu.so(+0xc274)[0x7f80388a3274] /usr/lib/python3.8/sitepackages/sage/structure/parent.cpython38x86_64linuxgnu.so(+0xd4aa)[0x7f80388a44aa] /usr/lib/python3.8/sitepackages/sage/structure/parent.cpython38x86_64linuxgnu.so(+0xfdd6)[0x7f80388a6dd6] /usr/lib/python3.8/sitepackages/sage/structure/parent.cpython38x86_64linuxgnu.so(+0x339ff)[0x7f80388ca9ff] /usr/lib/libpython3.8.so.1.0(+0x1965af)[0x7f803a9ce5af] /usr/lib/python3.8/sitepackages/sage/rings/integer_ring.cpython38x86_64linuxgnu.so(+0x16fc7)[0x7f7ffe8ccfc7] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0xb2b)[0x7f803a95649b] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304)[0x7f803a954654] /usr/lib/libpython3.8.so.1.0(PyEval_EvalCode+0x23)[0x7f803aa04b03] /usr/lib/libpython3.8.so.1.0(+0x1d1e0d)[0x7f803aa09e0d] /usr/lib/libpython3.8.so.1.0(+0x12f098)[0x7f803a967098] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x398)[0x7f803a955d08] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0xa22)[0x7f803a954d72] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x19d)[0x7f803a96687d] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0xa22)[0x7f803a954d72] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x19d)[0x7f803a96687d] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304)[0x7f803a954654] /usr/lib/libpython3.8.so.1.0(_PyObject_FastCallDict+0x225)[0x7f803a95e635] /usr/lib/libpython3.8.so.1.0(_PyObject_Call_Prepend+0x63)[0x7f803a971c13] /usr/lib/libpython3.8.so.1.0(+0x1f5e09)[0x7f803aa2de09] /usr/lib/libpython3.8.so.1.0(_PyObject_MakeTpCall+0x45c)[0x7f803a95f18c] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x4bf4)[0x7f803a95a564] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304)[0x7f803a954654] /usr/lib/libpython3.8.so.1.0(+0x13e442)[0x7f803a976442] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x117b)[0x7f803a956aeb] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyObject_FastCallDict+0x15e)[0x7f803a95e56e] /usr/lib/libpython3.8.so.1.0(+0x139824)[0x7f803a971824] /usr/lib/libpython3.8.so.1.0(_PyObject_MakeTpCall+0x500)[0x7f803a95f230] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x4bf4)[0x7f803a95a564] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x4cc5)[0x7f803a95a635] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x4cc5)[0x7f803a95a635] /usr/lib/libpython3.8.so.1.0(+0x13e356)[0x7f803a976356] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x4cc5)[0x7f803a95a635] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x7fa)[0x7f803a954b4a] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x19d)[0x7f803a96687d] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0xa22)[0x7f803a954d72] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x19d)[0x7f803a96687d] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyFunction_Vectorcall+0x108)[0x7f803a9667e8] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalFrameDefault+0x761)[0x7f803a9560d1] /usr/lib/libpython3.8.so.1.0(_PyEval_EvalCodeWithName+0x304)[0x7f803a954654] /usr/lib/libpython3.8.so.1.0(PyEval_EvalCode+0x23)[0x7f803aa04b03] /usr/lib/libpython3.8.so.1.0(+0x1d8248)[0x7f803aa10248] /usr/lib/libpython3.8.so.1.0(+0x1d2483)[0x7f803aa0a483] /usr/lib/libpython3.8.so.1.0(PyRun_FileExFlags+0x97)[0x7f803a8ca3f8] /usr/lib/libpython3.8.so.1.0(PyRun_SimpleFileExFlags+0x389)[0x7f803a8c9e8a] /usr/lib/libpython3.8.so.1.0(Py_RunMain+0x502)[0x7f803aa1d1e2] /usr/lib/libpython3.8.so.1.0(Py_BytesMain+0x39)[0x7f803a9f93d9] /usr/lib/libc.so.6(__libc_start_main+0xf2)[0x7f803a698002] /bin/python3(_start+0x2e)[0x5611ca37504e]
comment:228 followup: ↓ 230 Changed 13 months ago by
what will happen if you replace disablethreads
in the line
sdh_configure $SAGE_CONFIGURE_GMP disablethreads \
of ecl's spkginstall.in
with enablethreads=yes
?
comment:229 in reply to: ↑ 227 Changed 13 months ago by
Replying to arojas:
Compiling this branch against our system threadedenabled ecl gives multiple segfaults when running the test suite. Running the tests manually works fine. Running against system ecl used to work fine with the version of this branch pre20.04 upgrade
Adding to the old patch only the build fixes required to compile against 20.4 (ie ECL_OPT_TRAP_SIGCHLD etc removal) makes it work fine without segfaults. So some of the later modifications to the patch is causing this, will try to figure out which (doesn't look easy since the older commit history seems to be gone)
comment:230 in reply to: ↑ 228 ; followup: ↓ 231 Changed 13 months ago by
Replying to dimpase:
what will happen if you replace
disablethreads
in the linesdh_configure $SAGE_CONFIGURE_GMP disablethreads \
of ecl'sspkginstall.in
withenablethreads=yes
?
Not sure I understand  this is about distro packages, are you asking to test with sage's bundled ecl package built with threads? (FTR, the segfaults are not reproducible when using system ecl built without threads, so I expect they will happen with sage's ecl if it's built with threads)
comment:231 in reply to: ↑ 230 ; followup: ↓ 232 Changed 13 months ago by
Replying to arojas:
Replying to dimpase:
what will happen if you replace
disablethreads
in the linesdh_configure $SAGE_CONFIGURE_GMP disablethreads \
of ecl'sspkginstall.in
withenablethreads=yes
?Not sure I understand  this is about distro packages, are you asking to test with sage's bundled ecl package built with threads? (FTR, the segfaults are not reproducible when using system ecl built without threads, so I expect they will happen with sage's ecl if it's built with threads)
OK, sorry, I misunderstood what you were testing. Regarding multithreaded ECL 20.4.24 that you say you have a working version from an "old" branch, are you referring to https://github.com/sagemath/sagetracmirror/tree/u/ghspaghettisalat/eclupdate or some other branch?
comment:232 in reply to: ↑ 231 ; followup: ↓ 234 Changed 13 months ago by
Replying to dimpase:
OK, sorry, I misunderstood what you were testing. Regarding multithreaded ECL 20.4.24 that you say you have a working version from an "old" branch, are you referring to https://github.com/sagemath/sagetracmirror/tree/u/ghspaghettisalat/eclupdate or some other branch?
I mean the 'public/ticket22191' branch that was attached to this ticket previously. To sum up:
with the current 'public/packages/ecl20' tests segfault if ecl is built with threads, work fine if ecl is built without threads
with the 'public/ticket22191' plus the ECL_OPT_TRAP_SIGCHLDremoval part of this patch, there are no segfaults with ecl built with threads.
comment:233 Changed 13 months ago by
There are two different types of error: some modules fail with Unhandled SIGFPE
which kills the tests run. Those are fixed if I change safe_cl_boot(1, argv)
back to cl_boot(1, argv)
.
For other modules, I get a FloatingPointError: Floating point exception
for some tests, but the remaining tests are run.
Both are only reproducible when running the test suite, and work fine when the relevant code is run in a regular Sage session
comment:234 in reply to: ↑ 232 ; followup: ↓ 235 Changed 13 months ago by
Replying to arojas:
Replying to dimpase:
OK, sorry, I misunderstood what you were testing. Regarding multithreaded ECL 20.4.24 that you say you have a working version from an "old" branch, are you referring to https://github.com/sagemath/sagetracmirror/tree/u/ghspaghettisalat/eclupdate or some other branch?
I mean the 'public/ticket22191' branch that was attached to this ticket previously. To sum up:
with the current 'public/packages/ecl20' tests segfault if ecl is built with threads, work fine if ecl is built without threads
with the 'public/ticket22191'
this branch was for ECL 16.1.3, thus it is not clear to me which multithreadef ECL you tested.
In any case I hope ghspaghettisalad knows what is going on, I bet it has to do with fork() called by the doctesting framework.
comment:235 in reply to: ↑ 234 Changed 13 months ago by
Replying to dimpase:
this branch was for ECL 16.1.3, thus it is not clear to me which multithreadef ECL you tested.
I tested 20.4:
Replying to arojas:
Adding to the old patch only the build fixes required to compile against 20.4 (ie ECL_OPT_TRAP_SIGCHLD etc removal) makes it work fine without segfaults.
comment:236 Changed 13 months ago by
 Commit changed from 0b777377289ba21166ea8d4f647e38e8b6ea1d23 to 8ca1c0e5223d3e94ed36da2bfc22c9e608283074
Branch pushed to git repo; I updated commit sha1. New commits:
8ca1c0e  Merge tag '9.2.beta2' into t/22191/public/packages/ecl20

comment:237 followup: ↓ 238 Changed 13 months ago by
Compiling this branch against our system threadedenabled ecl gives multiple segfaults when running the test suite.
This was caused by a bug in ECL which has just been fixed (see https://gitlab.com/embeddablecommonlisp/ecl//commit/75877dd8f0d534552284ba4380ba65baa74f028f).
comment:238 in reply to: ↑ 237 Changed 13 months ago by
Replying to ghspaghettisalat:
Compiling this branch against our system threadedenabled ecl gives multiple segfaults when running the test suite.
This was caused by a bug in ECL which has just been fixed (see https://gitlab.com/embeddablecommonlisp/ecl//commit/75877dd8f0d534552284ba4380ba65baa74f028f).
Thanks, all good with this branch and patched, threads enabled ecl.
comment:239 followup: ↓ 268 Changed 13 months ago by
maybe upstream will do a minor release, so that we don't carry all these patches along?
comment:240 Changed 13 months ago by
 Commit changed from 8ca1c0e5223d3e94ed36da2bfc22c9e608283074 to f82c716fdf9c6e91a07166d36b6329a15ecfb41d
Branch pushed to git repo; I updated commit sha1. New commits:
f82c716  Commit 75877dd8 from upstream

comment:241 followup: ↓ 242 Changed 13 months ago by
 Status changed from needs_work to needs_review
tests are running on https://github.com/dimpase/sage/pull/13
comment:242 in reply to: ↑ 241 Changed 13 months ago by
Replying to dimpase:
tests are running on https://github.com/dimpase/sage/pull/13
Unfortunately the cygwin builds didn't make it to the interesting part
comment:243 Changed 13 months ago by
Could you restart https://github.com/dimpase/sage/actions/runs/150871954 ?
comment:244 followup: ↓ 245 Changed 13 months ago by
restarted tests, cygwinonly, on https://github.com/dimpase/sage/pull/14
by the way, I noticed a few places mentioning python2 in .github/workflows Are they leftovers, to be removed? I'm testing with the following diff applied:

.github/workflows/cicygwinminimal.yml
diff git a/.github/workflows/cicygwinminimal.yml b/.github/workflows/cicygwinminimal.yml index 97734216e8..aba9db76ae 100644
a b env: 11 11 MAKE: make j8 12 12 SAGE_NUM_THREADS: 3 13 13 SAGE_CHECK: warn 14 SAGE_CHECK_PACKAGES: "!cython,!r,!python3,! python2,!nose,!pathpy,!gap,!cysignals,!linbox,!git,!ppl"14 SAGE_CHECK_PACKAGES: "!cython,!r,!python3,!nose,!pathpy,!gap,!cysignals,!linbox,!git,!ppl" 15 15 CYGWIN: winsymlinks:native 16 16 CONFIGURE_ARGS: enableexperimentalpackages enabledownloadfromupstreamurl 17 17 SAGE_FAT_BINARY: yes 
.github/workflows/cicygwinstandard.yml
diff git a/.github/workflows/cicygwinstandard.yml b/.github/workflows/cicygwinstandard.yml index 8268e0e75f..f317a702f4 100644
a b env: 11 11 MAKE: make j8 12 12 SAGE_NUM_THREADS: 3 13 13 SAGE_CHECK: warn 14 SAGE_CHECK_PACKAGES: "!cython,!r,!python3,! python2,!nose,!pathpy,!gap,!cysignals,!linbox,!git,!ppl"14 SAGE_CHECK_PACKAGES: "!cython,!r,!python3,!nose,!pathpy,!gap,!cysignals,!linbox,!git,!ppl" 15 15 CYGWIN: winsymlinks:native 16 16 CONFIGURE_ARGS: enableexperimentalpackages enabledownloadfromupstreamurl 17 17 SAGE_FAT_BINARY: yes 
.github/workflows/updatecygwinyml.sh
diff git a/.github/workflows/updatecygwinyml.sh b/.github/workflows/updatecygwinyml.sh index 247fe20e18..bc1d195a9f 100755
a b 1 1 #!/usr/bin/env bash 2 for X in standardpython2minimal; do sed 's/\[standard\]/['$X']/g;s/CI cygwinstandard/CI cygwin'$X'/g;' cicygwinstandard.yml > cicygwin$X.yml; done2 for X in minimal; do sed 's/\[standard\]/['$X']/g;s/CI cygwinstandard/CI cygwin'$X'/g;' cicygwinstandard.yml > cicygwin$X.yml; done
comment:245 in reply to: ↑ 244 ; followup: ↓ 246 Changed 13 months ago by
Replying to dimpase:
restarted tests, cygwinonly, on https://github.com/dimpase/sage/pull/14
Thanks
by the way, I noticed a few places mentioning python2 in .github/workflows Are they leftovers, to be removed?
Yes, these changes are OK to do. Separate ticket please
comment:246 in reply to: ↑ 245 Changed 13 months ago by
comment:247 Changed 13 months ago by
unfortunately Cygwin GH Actions builds still fail for reasons which have nothing to do with this ticket.
Intermediate builds fail to upload.
comment:248 followup: ↓ 250 Changed 13 months ago by
Just restart another time
comment:249 Changed 13 months ago by
Probably better to do https://gitlab.com/embeddablecommonlisp/ecl//issues/599#note_369508934
comment:250 in reply to: ↑ 248 Changed 13 months ago by
comment:251 followup: ↓ 252 Changed 13 months ago by
The diff has a line build/pkgs/ecl/patches/ffi_abi_libffi33.oldpatch (renamed from build/pkgs/ecl/patches/ffi_abi_libffi33.patch)
.
Should this patch be removed or left in place?
comment:252 in reply to: ↑ 251 ; followup: ↓ 253 Changed 13 months ago by
Replying to pbruin:
The diff has a line
build/pkgs/ecl/patches/ffi_abi_libffi33.oldpatch (renamed from build/pkgs/ecl/patches/ffi_abi_libffi33.patch)
. Should this patch be removed or left in place?
removed (needless to say it has no effect on functionality). we're still not done with this, due to Cygwin errors. I'll post details on them.
comment:253 in reply to: ↑ 252 Changed 13 months ago by
Replying to dimpase:
Replying to pbruin:
The diff has a line
build/pkgs/ecl/patches/ffi_abi_libffi33.oldpatch (renamed from build/pkgs/ecl/patches/ffi_abi_libffi33.patch)
. Should this patch be removed or left in place?removed (needless to say it has no effect on functionality). we're still not done with this, due to Cygwin errors. I'll post details on them.
Thanks. By the way, I just opened #30063 for upgrading Maxima (though I am not planning to work on this myself).
comment:254 followup: ↓ 258 Changed 13 months ago by
cygwin errors:
pexpect chocked? something else? Perhaps, redo using libmaxima?
sage t src/doc/en/constructions/plotting.rst ********************************************************************** File "src/doc/en/constructions/plotting.rst", line 53, in doc.en.constructions.plotting Failed example: L = [(i/100.0, maxima.eval('jacobi_sn (%s/100.0,2.0)'%i)) for i in range(300,300)] Expected nothing Got: Maxima crashed  automatically restarting. **********************************************************************
the following resembles #8772  apparently just pexpect choking under heavy load?
sage t src/doc/en/tutorial/tour_algebra.rst ********************************************************************** File "src/doc/en/tutorial/tour_algebra.rst", line 219, in doc.en.tutorial.tour_algebra Failed example: de1 = maxima("2*diff(x(t),t, 2) + 6*x(t)  2*y(t)") Exception raised: Traceback (most recent call last): File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1383, in eval for L in code.split('\n') if L != '']) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1383, in <listcomp> for L in code.split('\n') if L != '']) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 793, in _eval_line self._error_check(line, out) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 934, in _error_check self._error_msg(cmd, out) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 951, in _error_msg raise TypeError("Error executing code in Maxima\nCODE:\n\t%s\nMaxima ERROR:\n\t%s"%(cmd, out.replace(' an error. To debug this try debugmode(true);',''))) TypeError: Error executing code in Maxima CODE: display2d : false; Maxima ERROR: incorrect syntax: Premature termination of input at ;. ; ^ During handling of the above exception, another exception occurred: ... sage t src/doc/ru/tutorial/tour_algebra.rst ********************************************************************** File "src/doc/ru/tutorial/tour_algebra.rst", line 202, in doc.ru.tutorial.tour_algebra Failed example: lde1 = de1.laplace("t","s"); lde1 Exception raised: Traceback (most recent call last): File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/doctest/forker.py", line 707, in _run self.compile_and_execute(example, compiler, test.globs) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/doctest/forker.py", line 1131, in compile_and_execute exec(compiled, globs) File "<doctest doc.ru.tutorial.tour_algebra[1]>", line 1, in <module> lde1 = de1.laplace("t","s"); lde1 File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 680, in __call__ return self._obj.parent().function_call(self._name, [self._obj] + list(args), kwds) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 596, in function_call args, kwds = self._convert_args_kwds(args, kwds) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 557, in _convert_args_kwds args[i] = self(arg) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 296, in __call__ return cls(self, x, name=name) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 1157, in __init__ ExpectElement.__init__(self, parent, value, is_name=False, name=None) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1469, in __init__ self._name = parent._create(value, name=name) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 501, in _create self.set(name, value) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 1002, in set self._eval_line(cmd) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 793, in _eval_line self._error_check(line, out) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 934, in _error_check self._error_msg(cmd, out) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 951, in _error_msg raise TypeError("Error executing code in Maxima\nCODE:\n\t%s\nMaxima ERROR:\n\t%s"%(cmd, out.replace(' an error. To debug this try debugmode(true);',''))) TypeError: Error executing code in Maxima CODE: sage4 : t$ Maxima ERROR: incorrect syntax: Premature termination of input at ;. ; ^ ... sage t src/doc/ru/tutorial/interfaces.rst ********************************************************************** File "src/doc/ru/tutorial/interfaces.rst", line 258, in doc.ru.tutorial.interfaces Failed example: f = maxima.eval('ij_entry[i,j] := i/j') Exception raised: Traceback (most recent call last): File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/doctest/forker.py", line 707, in _run self.compile_and_execute(example, compiler, test.globs) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/doctest/forker.py", line 1131, in compile_and_execute exec(compiled, globs) File "<doctest doc.ru.tutorial.interfaces[0]>", line 1, in <module> f = maxima.eval('ij_entry[i,j] := i/j') File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1383, in eval for L in code.split('\n') if L != '']) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1383, in <listcomp> for L in code.split('\n') if L != '']) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 782, in _eval_line self._sendline(line) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 644, in _sendline self._sendstr(string) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1250, in _sendstr self._start() File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 609, in _start Expect._start(self) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 527, in _start self.eval(X) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1383, in eval for L in code.split('\n') if L != '']) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1383, in <listcomp> for L in code.split('\n') if L != '']) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 788, in _eval_line assert line_echo.strip().endswith(line.strip()), 'mismatch:\n' + line_echo + line AssertionError: mismatch: nolabels : true; ... File "src/doc/ru/tutorial/interfaces.rst", line 259, in doc.ru.tutorial.interfaces Failed example: A = maxima('genmatrix(ij_entry,4,4)'); A Expected: matrix([1,1/2,1/3,1/4],[2,1,2/3,1/2],[3,3/2,1,3/4],[4,2,4/3,1]) Got: matrix([ij_entry[1,1],ij_entry[1,2],ij_entry[1,3],ij_entry[1,4]],[ij_entry[2,1],ij_entry[2,2],ij_entry[2,3],ij_entry[2,4]],[ij_entry[3,1],ij_entry[3,2],ij_entry[3,3],ij_entry[3,4]],[ij_entry[4,1],ij_entry[4,2],ij_entry[4,3],ij_entry[4,4]]) ... [and more of the same...] sage t src/sage/symbolic/assumptions.py ********************************************************************** File "src/sage/symbolic/assumptions.py", line 37, in sage.symbolic.assumptions Failed example: maxima('features') Exception raised: Traceback (most recent call last): File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/doctest/forker.py", line 707, in _run self.compile_and_execute(example, compiler, test.globs) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/doctest/forker.py", line 1131, in compile_and_execute exec(compiled, globs) File "<doctest sage.symbolic.assumptions[6]>", line 1, in <module> maxima('features') File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 296, in __call__ return cls(self, x, name=name) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 1157, in __init__ ExpectElement.__init__(self, parent, value, is_name=False, name=None) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1469, in __init__ self._name = parent._create(value, name=name) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 501, in _create self.set(name, value) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 1002, in set self._eval_line(cmd) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 782, in _eval_line self._sendline(line) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 644, in _sendline self._sendstr(string) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1250, in _sendstr self._start() File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 609, in _start Expect._start(self) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 527, in _start self.eval(X) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1383, in eval for L in code.split('\n') if L != '']) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1383, in <listcomp> for L in code.split('\n') if L != '']) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 788, in _eval_line assert line_echo.strip().endswith(line.strip()), 'mismatch:\n' + line_echo + line AssertionError: mismatch: domain : complex; ...
the following  already mentioned:
sage t src/sage/symbolic/expression.pyx ********************************************************************** File "src/sage/symbolic/expression.pyx", line 8735, in sage.symbolic.expression.Expression.arccosh Failed example: maxima('acosh(0.5)') Expected: 1.04719755119659...*%i Got: 1.047197551196598*%i1.110223024625157e16
is not a big deal, just a floating point noise.
Pexpext, again (?):
sage t src/sage/tests/books/computationalmathematicswithsagemath/sol/graphique_doctest.py ********************************************************************** File "src/sage/tests/books/computationalmathematicswithsagemath/sol/graphique_doctest.py", line 53, in sage.tests.books.computationalmathematicswithsagemath.sol.graphique_doctest Failed example: P = desolve_system_rk4(f(x,y), [x,y],ics=[0,10,5], ivar=t, end_points=15) Exception raised: Traceback (most recent call last): File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/doctest/forker.py", line 707, in _run self.compile_and_execute(example, compiler, test.globs) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/doctest/forker.py", line 1131, in compile_and_execute exec(compiled, globs) File "<doctest sage.tests.books.computationalmathematicswithsagemath.sol.graphique_doctest[22]>", line 1, in <module> P = desolve_system_rk4(f(x,y), [x,y],ics=[Integer(0),Integer(10),Integer(5)], ivar=t, end_points=Integer(15)) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/calculus/desolvers.py", line 1490, in desolve_system_rk4 maxima("load('dynamics)") File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 296, in __call__ return cls(self, x, name=name) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 1157, in __init__ ExpectElement.__init__(self, parent, value, is_name=False, name=None) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1469, in __init__ self._name = parent._create(value, name=name) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/interface.py", line 501, in _create self.set(name, value) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 1002, in set self._eval_line(cmd) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 782, in _eval_line self._sendline(line) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 644, in _sendline self._sendstr(string) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/expect.py", line 1250, in _sendstr self._start() File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 618, in _start self._eval_line('0;') File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 793, in _eval_line self._error_check(line, out) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 934, in _error_check self._error_msg(cmd, out) File "/cygdrive/d/a/sage/sage/local/lib/python3.7/sitepackages/sage/interfaces/maxima.py", line 951, in _error_msg raise TypeError("Error executing code in Maxima\nCODE:\n\t%s\nMaxima ERROR:\n\t%s"%(cmd, out.replace(' an error. To debug this try debugmode(true);',''))) TypeError: Error executing code in Maxima CODE: 0; Maxima ERROR: incorrect syntax: tex is not an infix operator lisp (defun tex ^
comment:255 Changed 13 months ago by
see the attachment for complete ptest.log on Cygwin
comment:256 Changed 13 months ago by
As we don't see errors on embedded Maxima, but only on pexpect Maxima, I am inclined to say it is OK.
comment:257 Changed 13 months ago by
Maybe not "OK", but I think acceptable for the next beta. But the precise failure mode of the maxima pexpect interface should be investigated. This is clearly a regression from the older ECL.
comment:258 in reply to: ↑ 254 ; followup: ↓ 263 Changed 13 months ago by
Replying to dimpase:
cygwin errors:
pexpect chocked? [...]
sage t src/doc/en/constructions/plotting.rst ********************************************************************** File "src/doc/en/constructions/plotting.rst", line 53, in doc.en.constructions.plotting Failed example: L = [(i/100.0, maxima.eval('jacobi_sn (%s/100.0,2.0)'%i)) for i in range(300,300)] Expected nothing Got: Maxima crashed  automatically restarting. **********************************************************************the following resembles #8772  apparently just pexpect choking under heavy load?
Yes, let's reuse that old ticket to investigate this more.
comment:259 followup: ↓ 261 Changed 13 months ago by
it could actually be an improvement  maxima runs faster, and on a heavily loaded host this leads to this mess. I will try another round of Cygwin tests, with tests not run in parallel.
comment:260 Changed 13 months ago by
It would be really good to simulate these tests without having to build all of Sage so that this could become part of the CI in https://github.com/spaghettisalat/ecl/pull/1
comment:261 in reply to: ↑ 259 ; followup: ↓ 265 Changed 13 months ago by
Replying to dimpase:
it could actually be an improvement  maxima runs faster, and on a heavily loaded host this leads to this mess. I will try another round of Cygwin tests, with tests not run in parallel.
tests running at https://github.com/dimpase/sage/actions/runs/157700338
comment:262 Changed 13 months ago by
by the way, there are also a number of giac tests failing on Cygwin, with a very similar pexpect under heavy load (see attachment ptest results); so I really think there is nothing wrong with ECL on Cygwin per se, it's pexpect that plays up in this particular testing configuration.
comment:263 in reply to: ↑ 258 ; followup: ↓ 264 Changed 13 months ago by
Replying to mkoeppe:
Replying to dimpase:
cygwin errors:
pexpect chocked? [...]
sage t src/doc/en/constructions/plotting.rst ********************************************************************** File "src/doc/en/constructions/plotting.rst", line 53, in doc.en.constructions.plotting Failed example: L = [(i/100.0, maxima.eval('jacobi_sn (%s/100.0,2.0)'%i)) for i in range(300,300)] Expected nothing Got: Maxima crashed  automatically restarting. **********************************************************************the following resembles #8772  apparently just pexpect choking under heavy load?
Yes, let's reuse that old ticket to investigate this more.
this can be rewritten as follows,
sage: L = [(i/100.0, maxima_calculus.eval('jacobi_sn (%s/100.0,2.0)'%i)) ....: for i in range(300,300)]
avoiding pexpect, I think. Indeed, it's 5 times faster:
sage: timeit("L = [(i/100.0, maxima_calculus.eval('jacobi_sn (%s/100.0,2.0)'%i)) for i in range(300,300)]") 5 loops, best of 3: 110 ms per loop sage: timeit("L = [(i/100.0, maxima.eval('jacobi_sn (%s/100.0,2.0)'%i)) for i in range(300,300)]") 5 loops, best of 3: 556 ms per loop
comment:264 in reply to: ↑ 263 Changed 13 months ago by
comment:265 in reply to: ↑ 261 Changed 13 months ago by
Replying to dimpase:
Replying to dimpase:
it could actually be an improvement  maxima runs faster, and on a heavily loaded host this leads to this mess. I will try another round of Cygwin tests, with tests not run in parallel.
tests running at https://github.com/dimpase/sage/actions/runs/157700338
and this ran out of time limit, so no interesting tests were performed.
I think we should proceed with merging this ticket, anyway, and speed up Maxima things on #30071
comment:266 Changed 13 months ago by
 Status changed from needs_review to positive_review
comment:267 Changed 13 months ago by
 Branch changed from public/packages/ecl20 to f82c716fdf9c6e91a07166d36b6329a15ecfb41d
 Resolution set to fixed
 Status changed from positive_review to closed
comment:268 in reply to: ↑ 239 Changed 13 months ago by
 Commit f82c716fdf9c6e91a07166d36b6329a15ecfb41d deleted
Replying to dimpase:
maybe upstream will do a minor release, so that we don't carry all these patches along?
Sorry for the late reply, I've been busy. I agree that a bugfix release is needed. This will probably still take a bit though, I want to take a look at some other bugs first (https://gitlab.com/embeddablecommonlisp/ecl//issues/594 and https://gitlab.com/embeddablecommonlisp/ecl//issues/586) and then there's still tests to run.
New commits:
Upgrade Jupyter packages, add enum34
Merge branch 'u/jdemeyer/upgrade_jupyter_packages' of trac.sagemath.org:sage into develop
Merge branch 'develop' of trac.sagemath.org:sage into develop
Update source to 2.11.0, fix checksum.
Merge branch 'u/charpent/upgrade_git_to_2_10_2__or_2_11___' of trac.sagemath.org:sage into newgit
update ECL to 16.1.3  most of our patches are obsolete